DS90UR905QSQ/NOPB National Semiconductor, DS90UR905QSQ/NOPB Datasheet - Page 7

no-image

DS90UR905QSQ/NOPB

Manufacturer Part Number
DS90UR905QSQ/NOPB
Description
IC SER/DESERIAL 24BIT 48LLP
Manufacturer
National Semiconductor
Series
PowerWise®r
Datasheet

Specifications of DS90UR905QSQ/NOPB

Function
Serializer
Data Rate
1.82Gbps
Input Type
Parallel
Output Type
Serial
Number Of Inputs
24
Number Of Outputs
1
Voltage - Supply
1.71 V ~ 1.89 V
Operating Temperature
-40°C ~ 105°C
Mounting Type
Surface Mount
Package / Case
48-WFQFN, Exposed Pad
Lead Free Status / RoHS Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
DS90UR905QSQ/NOPB
Manufacturer:
TI/德州仪器
Quantity:
20 000
Company:
Part Number:
DS90UR905QSQ/NOPB
Quantity:
1 559
Pin Name
LVCMOS Parallel Interface
R[7:0]
G[7:0]
B[7:0]
HS
VS
DE
PCLK
LOCK
PASS
Control and Configuration — STRAP PINS
For a High State, use a 10 kΩ pull up to V
power-up and set device configuration. Pin Number listed along with shared RGB Output name in square brackets.
CONFIG[1:0]
LF_MODE
DS90UR906Q Deserializer Pin Descriptions
33, 34, 35,
36, 37, 39,
20, 21, 22,
23, 25, 26,
12, 14, 17,
9, 10, 11,
10 [B6],
12 [B4]
40, 41
27, 28
18, 19
9 [B7]
Pin #
32
42
8
7
6
5
w/ pull-down
w/ pull-down
O, LVCMOS
O, LVCMOS
O, LVCMOS
O, LVCMOS Horizontal Sync Output
O, LVCMOS Vertical Sync Output
O, LVCMOS Data Enable Output
O, LVCMOS Pixel Clock Output
O, LVCMOS LOCK Status Output
O, LVCMOS PASS Output (BIST Mode)
I, LVCMOS
I, LVCMOS
I, STRAP,
I, STRAP,
I, STRAP,
I/O, Type
STRAP
STRAP
DDIO
Description
RED Parallel Interface Data Output Pins (MSB = 7, LSB = 0)
In power-down (PDB = 0), outputs are controlled by the OSS_SEL (See
pins are inputs during power-up (See STRAP Inputs).
GREEN Parallel Interface Data Output Pins (MSB = 7, LSB = 0)
In power-down (PDB = 0), outputs are controlled by the OSS_SEL (See
pins are inputs during power-up (See STRAP Inputs).
BLUE Parallel Interface Data Output Pins (MSB = 7, LSB = 0)
In power-down (PDB = 0), outputs are controlled by the OSS_SEL (See
pins are inputs during power-up (See STRAP Inputs).
In power-down (PDB = 0), output is controlled by the OSS_SEL pin (See
control signal pulse width must be 3 PCLKs or longer to be transmitted when the Control
Signal Filter is enabled (CONFIG[1:0] = 01). There is no restriction on the minimum transition
pulse when the Control Signal Filter is disabled (CONFIG[1:0] = 00). The signal is limited to
2 transitions per 130 PCLKs.
In power-down (PDB = 0), output is controlled by the OSS_SEL pin (See
control signal is limited to 1 transition per 130 PCLKs. Thus, the minimum pulse width is 130
PCLKs.
In power-down (PDB = 0), output is controlled by the OSS_SEL pin (See
control signal pulse width must be 3 PCLKs or longer to be transmitted when the Control
Signal Filter is enabled (CONFIG[1:0] = 01). There is no restriction on the minimum transition
pulse when the Control Signal Filter is disabled (CONFIG[1:0] = 00). The signal is limited to
2 transitions per 130 PCLKs.
In power-down (PDB = 0), output is controlled by the OSS_SEL pin (See
edge set by RFB function.
LOCK = 1, PLL is Locked, outputs are active LOCK = 0, PLL is unlocked, RGB[7:0], HS,
VS, DE and PCLK output states are controlled by OSS_SEL (See
as Link Status or to flag when Video Data is active (ON/OFF).
PASS = 1, error free transmission
PASS = 0, one or more errors were detected in the received payload
Route to test point for monitoring, or leave open if unused.
Operating Modes — Pin or Register Control
These pins determine the DS90UR906’s operating mode and interfacing device.
CONFIG[1:0] = 00: Interfacing to DS90UR905, Control Signal Filter DISABLED
CONFIG[1:0] = 01: Interfacing to DS90UR905, Control Signal Filter ENABLED
CONFIG[1:0] = 10: Interfacing to DS90UR241
CONFIG[1:0] = 11: Interfacing to DS90C241
SSCG Low Frequency Mode — Pin or Register Control
Only required when SSCG is enabled, otherwise LF_MODE condition is a DON’T CARE
(X).
LF_MODE = 1, SSCG in low frequency mode (PCLK = 5-20 MHz)
LF_MODE = 0, SSCG in high frequency mode (PCLK = 20-65 MHz)
; for a Low State, the IO includes an internal pull down. The STRAP pins are read upon
7
Table
Table
Table
Table
8). May be used
Table
Table
Table
Table
www.national.com
8). These
8). These
8). These
8). Video
8). Video
8). Video
8). Strobe

Related parts for DS90UR905QSQ/NOPB