MC13892VK Freescale Semiconductor, MC13892VK Datasheet - Page 35

• Manufacturer Part Number: MC13892VK
• Description: IC PMU I.MX51/37/35/27 139MAPBGA
• Manufacturer: Freescale Semiconductor

Specifications of MC13892VK

• Applications: Battery Management, Display (LED Drivers), Handheld/Mobile Devices, Power Supply
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: *
• Output Current: 65 mA
• Output Voltage: 1.5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Supply: -
• Voltage - Supply: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REGULATORS
VINIOHI
VIOHI
VINPLL AND VINDIG
either BP or a 1.8 V switched mode power supply rail, such as from SW4 for the two lower set points of each regulator (the 1.2
and 1.25 V output for VPLL, and 1.05 and 1.25 V output for VDIG). In addition, when the two upper set points are used (1.50 and
1.8V outputs for VPLL, and 1.65 and 1.8V for VDIG), they can be connected to either BP or a 2.2V nominal external switched
mode power supply rail, to improve power dissipation.
VPLL
VDIG
VVIDEODRV
VVIDEO
VINAUDIO
VAUDIO
VINUSB2
VUSB2
VINCAMDRV
of the PNP in order to drive it.
VCAM
VSDDRV
VSD
Analog Integrated Circuit Device Data
Freescale Semiconductor
Input of VIOHI regulator. Connect this pin to BP in order to supply VIOHI regulator.
Output regulator for high voltage IO. Fixed 2.775 V output for high voltage level interface.
The input of the regulator for processor PLL and Digital regulators respectively. VINDIG and VINPLL can be connected to
Output of regulator for processor PLL. Quiet analog supply (PLL, GPS).
Output regulator Digital. Low voltage digital (DPLL, GPS).
Drive output for VVIDEO external PNP transistor.
Output regulator TV DAC. This pin must be connected to the collector of the external PNP transistor of the VVIDEO regulator.
Input regulator VAUDIO. Typically connected to BP.
Output regulator for audio supply.
Input regulator VUSB2. This pin must always be connected to BP even if the regulators are not used by the application.
Output regulator for powering USB PHY.
1. Input regulator camera using internal PMOS FET. Typically connected to BP.
2. Drive output regulator for camera voltage using external PNP device. In this case, this pin must be connected to the base
Output regulator for the camera module. When using an external PNP device, this pin must be connected to its collector.
Drive output for the VSD external PNP transistor.
Output regulator for multi-media cards such as micro SD, RS-MMC.
FUNCTIONAL PIN DESCRIPTION
FUNCTIONAL DESCRIPTION
13892
35