102.1947 FISCHER CONNECTORS, 102.1947 Datasheet - Page 61

• Manufacturer Part Number: 102.1947
• Description: SEALING CAP, MATING FACE OF RECEPTACLE
• Manufacturer: FISCHER CONNECTORS

Specifications of 102.1947

• Accessory Type: Sealing Cap
• Rohs Compliant: Yes
• For Use With: Mating Face Of The Receptacles
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

All dimensions shown are in millimeters and are for reference only.
ASSEMBLY
TOOLS
Material - Handle: POM (black Delrin®)
Material - Housing and Plunger: POM (black Delrin®)
Assembly Tool for female contacts with
inside thread
Contact Insertion Tool
Assembly Tool for male contacts with
outside thread
Contact Extraction Tool
Fork:
Sleeve:
Slide:
Tool Steel, chrome plated
TOOLS FOR CRIMP CONTACTS
AND HIGH VOLTAGE CONTACTS
Stainless Steel
Tool Steel
Tool for extracting male and female removable, crimp contacts
from the contact block.
The sleeve of this tool is pushed over the contact, thereby
releasing the contact retaining mechanism. The tool plunger is
then pushed to eject the contact.
Tool for special, male contacts (e.g. contact P/N E22 200.15)
which are inserted only after termination to a wire.
Slip tool through the contact mounting hole from the mating
side of the contact block. Screw the tool onto the terminated
contact and pull firmly until the contact is locked into the
contact block.
Attention: Once contact P/N E22 200.15 has been inserted into
Tool for special, female contacts (e.g. contact P/N E22 200.14)
which are inserted only after termination to a wire.
Slip tool through the contact mounting hole from the mating
side of the contact block. Screw the tool into the terminated
contact and pull firmly until the contact is locked into the
contact block.
Attention: Once contact P/N E22 200.14 has been inserted into
Tool for inserting male and female removable,
crimp contacts into the contact block.
Especially recommended for small gauge and fragile wires.
Length:
Inside thread: M3
Material:
Length:
Outside thread: M1.7
Material:
TP00.001
TP00.000
3
Contact Dia.
Contact Dia.
0.5
0.7
0.9
1.3
0.5
0.7
0.9
1.3
1.6
the contact block, it cannot be removed.
the contact block, it cannot be removed.
75 mm
Stainless Steel
Part Number
Part Number
75 mm
Stainless Steel
TX00.214
TX00.210
TX00.211
TX00.273
TX00.213
TX00.200
TX00.205
TX00.212
TX00.201
Coax Insert No Part Number
E22 200.48
E22 200.49
E22 200.55
E22 200.56
E22 200.71
TX00.275
TX00.274
K