102.1947 FISCHER CONNECTORS, 102.1947 Datasheet - Page 74

• Manufacturer Part Number: 102.1947
• Description: SEALING CAP, MATING FACE OF RECEPTACLE
• Manufacturer: FISCHER CONNECTORS

Specifications of 102.1947

• Accessory Type: Sealing Cap
• Rohs Compliant: Yes
• For Use With: Mating Face Of The Receptacles
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

M
General Environmental Protection
In many applications where only a protection against dust or liquid splash is required, an unsealed connector shrouded with a
flexible protective sleeve will perform effectively. Additionally, connectors can be protected with sealing caps while unmated.
Protective sleeves and caps are also very effective in preventing dirt, mud or other foreign matter from fouling, shorting, or
damaging the contacts. Mechanical damage from impact on hard surfaces can also be minimized with the use of this
accessories.
The following plug types are suitable for use with protective sleeves:
S
SC
SOV
K
KE
Tamper-proof plugs SV and SA cannot be equipped with protective sleeves.
Locking plug
Clic-Loc™ plug
Non-locking plug
Cable receptacle
Sealed cable receptacle
}
TECHNICAL INFORMATION
listed under «Accessories» on page J1.
4
Front projecting receptacles DB, DBEE
or DBEU and plug with protective sleeve
The front end of the plug’s protective sleeve
encloses the projecting portion of the
receptacle DB, DBEE, DBEU.
Plug and cable receptacle K or KE, both
with protective sleeves
The front end of the plug’s protective sleeves
encloses the front of the receptacle K or KE.
Panel mounted cable receptacle DKE,
DKBE and plug with protective sleeve
The front end of the protective sleeve encloses
the projecting portion of the DKE and DKBE.
The combination is only possible for DKE,
DKBE Series 104, 105, 106 and 107.
Bulk-head feedthrough WDE and plug
with protective sleeve
The front end of the protective sleeve encloses
the projecting portion of the WDE.
The combination is only possible for WDE
Series 102, 103 and 104 (Type 1, page B8).