DP83848HSQ National Semiconductor, DP83848HSQ Datasheet - Page 12

• Manufacturer Part Number: DP83848HSQ
• Description: IC, TRANSCEIVER, ENET PHYTER, 40LLP
• Manufacturer: National Semiconductor

Specifications of DP83848HSQ

• Data Rate: 100Mbps
• No. Of Ports: 1
• Ethernet Type: IEEE 802.3u
• Supply Current: 92mA
• Supply Voltage Range: 3V To 3.6V
• Operating Temperature Range: -40°C To +125°C
• Digital Ic Case Style: LLP
• No. Of: RoHS Compliant
• Interface Type: MII Serial, RMII
• Rohs Compliant: Yes

www.national.com
AN0 (LED_LINK)
MII_MODE (RX_DV)
LED_CFG (CRS/CRS_DV)
MDIX_EN (RX_ER)
Signal Name
S, O, PU
S, O, PD
S, O, PU
S, O, PU
Type
Pin #
22
32
33
34
This input pin controls the advertised operating mode of the
DP83848H according to the following table. The value on this pin
is set by connecting it to GND (0) or V
tors. This pin should NEVER be connected directly to GND or
VCC.
The value set at this input is latched into the DP83848H at Hard-
ware-Reset.
The float/pull-down status of this pin is latched into the Basic
Mode Control Register and the Auto_Negotiation Advertisement
Register during Hardware-Reset.
The default is 1 since this pin has an internal pull-up.
MII MODE SELECT: This strapping option determines the oper-
ating mode of the MAC Data Interface. Default operation (No pul-
lup) will enable normal MII Mode of operation. Strapping
MII_MODE high will cause the device to be in RMII mode of oper-
ation. Since the pin includes an internal pull-down, the default val-
ue is 0.
The following table details the configuration:
LED CONFIGURATION: This strapping option determines the
mode of operation of the LED pins. Default is Mode 1. Mode 1 and
Mode 2 can be controlled via the strap option. All modes are con-
figurable via register access.
SeeTable 3 for LED Mode Selection.
MDIX ENABLE: Default is to enable MDIX. This strapping option
disables Auto-MDIX. An external pull-down will disable Auto-
MDIX mode.
12
MII_MODE
AN0
0
1
0
1
10BASE-T Half-Duplex
100BASE-TX, Half-Duplex
10BASE-T, Half/Full-Duplex
100BASE-TX, Half/Full-Duplex
Description
Advertised Mode
MII Mode
RMII Mode
MAC Interface Mode
CC
(1) through 2.2 k resis-