DSPIC30F5011-30I/PTG Microchip Technology, DSPIC30F5011-30I/PTG Datasheet - Page 3

• Manufacturer Part Number: DSPIC30F5011-30I/PTG
• Description: 16BIT MCU-DSP 30MHZ, SMD, 30F5011
• Manufacturer: Microchip Technology
• Series: DsPIC30Fr

Specifications of DSPIC30F5011-30I/PTG

• Core Frequency: 30MHz
• Embedded Interface Type: CAN, I2C, SPI, UART
• No. Of I/o's: 52
• Flash Memory Size: 66KB
• Supply Voltage Range: 2.5V To 5.5V
• Operating Temperature Range: -40°C To
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

High Performance Modified RISC CPU:
• Modified Harvard architecture
• C compiler optimized instruction set architecture
• Flexible addressing modes
• 84 base instructions
• 24-bit wide instructions, 16-bit wide data path
• 66 Kbytes on-chip Flash program space
• 4 Kbytes of on-chip data RAM
• 1 Kbytes of non-volatile data EEPROM
• 16 x 16-bit working register array
• Up to 30 MIPs operation:
• Up to 41 interrupt sources:
DSP Features:
• Dual data fetch
• Modulo and Bit-reversed modes
• Two 40-bit wide accumulators with optional
• 17-bit x 17-bit single cycle hardware fractional/
• All DSP instructins are single cycle
• Single cycle ±16 shift
Peripheral Features:
• High current sink/source I/O pins: 25 mA/25 mA
• Five 16-bit timers/counters; optionally pair up 16-
• 16-bit Capture input functions
• 16-bit Compare/PWM output functions:
• Data Converter Interface (DCI) supports common
• 3-wire SPI™ modules (supports 4 Frame modes)
 2004 Microchip Technology Inc.
- DC to 40 MHz external clock input
- 4 MHz-10 MHz oscillator input with
- 8 user selectable priority levels
- 5 external interrupt sources
- 4 processor traps
saturation logic
integer multiplier
- Multiply-Accumulate (MAC) operation
bit timers into 32-bit timer modules
audio Codec protocols, including I
PLL active (4x, 8x, 16x)
dsPIC30F5011/5013 High Performance
Digital Signal Controllers
2
S and AC’97
dsPIC30F5011/5013
Preliminary
• I
• Two addressable UART modules with FIFO
• Two CAN bus modules compliant with CAN 2.0B
Analog Features:
• 12-bit Analog-to-Digital Converter (A/D) with:
• Programmable Low Voltage Detection (PLVD)
• Programmable Brown-out Detection and Reset
Special Microcontroller Features:
• Enhanced Flash program memory:
• Data EEPROM memory:
• Self-reprogrammable under software control
• Power-on Reset (POR), Power-up Timer (PWRT)
• Flexible Watchdog Timer (WDT) with on-chip low
• Fail-Safe Clock Monitor operation:
• Programmable code protection
• In-Circuit Serial Programming™ (ICSP™)
• Selectable Power Management modes:
CMOS Technology:
• Low power, high speed Flash technology
• Wide operating voltage range (2.5V to 5.5V)
• Industrial and Extended temperature ranges
• Low power consumption
and 7-bit/10-bit addressing
buffers
standard
- 100 Ksps conversion rate
- Up to 16 input channels
- Conversion available during Sleep and Idle
generation
- 10,000 erase/write cycle (min.) for
- 100,000 erase/write cycle (min.) for
and Oscillator Start-up Timer (OST)
power RC oscillator for reliable operation
- Detects clock failure and switches to on-chip
- Sleep, Idle and Alternate Clock modes
2
C™ module supports Multi-Master/Slave mode
industrial temperature range, 100K (typical)
industrial temperature range, 1M (typical)
low power RC oscillator
DS70116C-page 1