PIC12F1822-I/MF Microchip Technology, PIC12F1822-I/MF Datasheet - Page 335

• Manufacturer Part Number: PIC12F1822-I/MF
• Description: IC, 8BIT MCU, PIC12, 32MHZ, DFN-8
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 12Fr

Specifications of PIC12F1822-I/MF

• Controller Family/series: PIC12
• No. Of I/o's: 6
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 128Byte
• Cpu Speed: 32MHz
• No. Of Timers: 3
• Core Size: 8 Bit
• Program Memory Size: 3.5KB
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 6
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-DFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

LSLF
Syntax:
Operands:
Operation:
Status Affected:
Description:
LSRF
Syntax:
Operands:
Operation:
Status Affected:
Description:
 2010 Microchip Technology Inc.
Logical Left Shift
[ label ] LSLF
0  f  127
d [0,1]
(f<7>)  C
(f<6:0>)  dest<7:1>
0  dest<0>
C, Z
The contents of register ‘f’ are shifted
one bit to the left through the Carry flag.
A ‘0’ is shifted into the LSb. If ‘d’ is ‘0’,
the result is placed in W. If ‘d’ is ‘1’, the
result is stored back in register ‘f’.
Logical Right Shift
[ label ] LSLF
0  f  127
d [0,1]
0  dest<7>
(f<7:1>)  dest<6:0>,
(f<0>)  C,
C, Z
The contents of register ‘f’ are shifted
one bit to the right through the Carry
flag. A ‘0’ is shifted into the MSb. If ‘d’ is
‘0’, the result is placed in W. If ‘d’ is ‘1’,
the result is stored back in register ‘f’.
0
C
register f
f {,d}
f {,d}
register f
PIC12F/LF1822/PIC16F/LF1823
C
Preliminary
0
MOVF
Syntax:
Operands:
Operation:
Status Affected:
Description:
Words:
Cycles:
Example:
Move f
[ label ]
0  f  127
d  [0,1]
(f)  (dest)
Z
The contents of register f is moved to
a destination dependent upon the
status of d. If d = 0,
destination is W register. If d = 1, the
destination is file register f itself. d = 1
is useful to test a file register since
status flag Z is affected.
1
1
After Instruction
MOVF
W =
Z
MOVF f,d
=
FSR, 0
value in FSR register
1
DS41413B-page 335