PIC24FJ64GB004-I/ML Microchip Technology, PIC24FJ64GB004-I/ML Datasheet - Page 256

• Manufacturer Part Number: PIC24FJ64GB004-I/ML
• Description: IC, 16BIT MCU, PIC24F, 32MHZ, QFN-44
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 24Fr

Specifications of PIC24FJ64GB004-I/ML

• Controller Family/series: PIC24
• Ram Memory Size: 8KB
• Cpu Speed: 32MHz
• No. Of Timers: 5
• Interface: I2C, LIN, SPI, UART, USB
• No. Of Pwm Channels: 5
• Core Size: 16 Bit
• Program Memory Size: 64 KB
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 33
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-QFN
• Embedded Interface Type: I2C, LIN, SPI, UART, USB
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARD
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

PIC24FJ64GB004 FAMILY
REGISTER 21-1:
DS39940D-page 256
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15
bit 14
bit 13
bit 12-8
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2-0
R-0, HCS
CRCFUL
CRCEN
R/W-0
CRCEN: CRC Enable bit
1 = Module is enabled
0 = Module is enabled. All state machines, pointers and CRCWDAT/CRCDAT are reset; other SFRs are
Unimplemented: Read as ‘0’
CSIDL: CRC Stop in Idle Mode bit
1 = Discontinue module operation when device enters Idle mode
0 = Continue module operation in Idle mode
VWORD<4:0>: Pointer Value bits
Indicates the number of valid words in the FIFO. Has a maximum value of 8 when PLEN<3:0> > 7
or 16 when PLEN<3:0> 7.
CRCFUL: FIFO Full bit
1 = FIFO is full
0 = FIFO is not full
CRCMPT: FIFO Empty Bit
1 = FIFO is empty
0 = FIFO is not empty
CRCISEL: CRC interrupt Selection bit
1 = Interrupt on FIFO is empty; CRC calculation is not complete
0 = Interrupt on shift is complete and CRCWDAT result is ready
CRCGO: Start CRC bit
1 = Start CRC serial shifter
0 = CRC serial shifter is turned off
LENDIAN: Data Shift Direction Select bit
1 = Data word is shifted into the CRC starting with the LSb (little endian)
0 = Data word is shifted into the CRC starting with the MSb (big endian)
Unimplemented: Read as ‘0’
R-1, HCS
CRCMPT
U-0
NOT reset
—
CRCCON1: CRC CONTROL REGISTER 1
HC = Hardware Clearable bit
W = Writable bit
‘1’ = Bit is set
CRCISEL
CSIDL
R/W-0
R/W-0
R/W-0, HC
VWORD4
CRCGO
R-0
HCS = Hardware Clearable/Settable bit
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
VWORD3
LENDIAN
R/W-0
R-0
VWORD2
R-0
U-0
—
 2010 Microchip Technology Inc.
x = Bit is unknown
VWORD1
R-0
U-0
—
VWORD0
R-0
U-0
—
bit 8
bit 0