LA-ISPPAC-POWR1014-01TN48E LATTICE SEMICONDUCTOR, LA-ISPPAC-POWR1014-01TN48E Datasheet - Page 40

• Manufacturer Part Number: LA-ISPPAC-POWR1014-01TN48E
• Description: IC, PROG POWER SUPPLY SUPERVISOR TQFP-48
• Manufacturer: LATTICE SEMICONDUCTOR

Specifications of LA-ISPPAC-POWR1014-01TN48E

• Input Voltage: 4.5V
• Supply Voltage Range: 2.8V To 3.96
• No. Of Pins: 48
• Operating Temperature Range: -40°C To +105°C
• Frequency: 25MHz
• No. Of Macrocells: 24
• Termination Type: SMD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Lattice Semiconductor
LA-ispPAC-POWR1014/A Automotive Family Data Sheet
PROGRAM_DONE_BIT – This instruction sets the ‘Done’ bit, which enables the LA-ispPAC-POWR1014/A
sequence to start.
RESET – This instruction resets the PLD sequence and output macrocells.
IN1_RESET_JTAG_BIT – This instruction clears the JTAG Register logic input ‘IN1.’ The PLD input has to be con-
figured to take input from the JTAG Register in order for this command to have effect on the sequence.
IN1_SET_JTAG_BIT – This instruction sets the JTAG Register logic input ‘IN1.’ The PLD input has to be configured
to take input from the JTAG Register in order for this command to have effect on the sequence.
PLD_VERIFY_INCR – This instruction reads out the PLD data register for the current address and increments the
address register for the next read.
Notes:
In all of the descriptions above, OUTPUTS_HIGHZ refers both to the instruction and the state of the digital output
pins, in which the open-drains are tri-stated and the FET drivers are pulled low.
2
Before any of the above programming instructions are executed, the respective E
CMOS bits need to be erased
using the corresponding erase instruction.
40