SAK-C164CI-8E25M Infineon Technologies, SAK-C164CI-8E25M Datasheet - Page 19
![IC, 16BIT MCU, 64K OTP, MQFP80, 164](/photos/19/7/190708/ge80mqfp05-40_sml.jpg)
SAK-C164CI-8E25M
Manufacturer Part Number
SAK-C164CI-8E25M
Description
IC, 16BIT MCU, 64K OTP, MQFP80, 164
Manufacturer
Infineon Technologies
Datasheet
1.SAK-C164CI-8E25M.pdf
(53 pages)
Specifications of SAK-C164CI-8E25M
Core Size
16bit
No. Of I/o's
59
Program Memory Size
64KB
Ram Memory Size
4KB
Cpu Speed
25MHz
Oscillator Type
External Only
No. Of Timers
5
Digital Ic Case Style
MQFP
Supply Voltage
RoHS Compliant
Controller Family/series
C164CI
Peripherals
ADC
Rohs Compliant
Yes
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
SAK-C164CI-8E25M
Manufacturer:
INFINEON
Quantity:
49
Company:
Part Number:
SAK-C164CI-8E25M DB
Manufacturer:
Infineon Technologies
Quantity:
10 000
C164CI
General Purpose Timer (GPT) Unit
The GPT unit represents a very flexible multifunctional timer/counter structure which may be used
for many different time related tasks such as event timing and counting, pulse width and duty cycle
measurements, pulse generation, or pulse multiplication.
The GPT unit incorporates three 16-bit timers. Each timer may operate independently in a number
of different modes, or may be concatenated with another timer.
Timer T3 can be configured for one of four basic modes of operation, which are Timer, Gated Timer,
Counter, and Incremental Interface Mode. Timers T2 and T4 can only be operated in timer mode.
In Timer Mode, the input clock for a timer is derived from the CPU clock, divided by a programmable
prescaler, while Counter Mode allows a timer to be clocked in reference to external events.
Pulse width or duty cycle measurement is supported in Gated Timer Mode, where the operation of
a timer is controlled by the ‘gate’ level on an external input pin. For these purposes the associated
port pin (T3IN) serves as gate or clock input. The maximum resolution of the timers is 400 ns (@
20 MHz CPU clock).
The count direction (up/down) for each timer is programmable by software or may additionally be
altered dynamically by an external signal on pin T3EUD for T3 to facilitate eg. position tracking.
In Incremental Interface Mode timer T3 can be directly connected to the incremental position sensor
signals A and B via the respective inputs T3IN and T3EUD. Direction and count signals are
internally derived from these two input signals, so the contents of timer T3 corresponds to the
sensor position. The third position sensor signal TOP0 can be connected to an interrupt input.
Timer T3 has an output toggle latch (T3OTL) which changes its state on each timer over-flow/
underflow. The state of this latch may be used internally to clock timers T2 and T4 for measuring
long time periods with high resolution.
In addition to their basic operating modes, timers T2 and T4 may be configured as reload registers
for timer T3. When used as reload registers, timers T2 and T4 are stopped. Timer T3 is reloaded
with the contents of T2 or T4 triggered by a selectable state transition of its toggle latch T3OTL.
Semiconductor Group
19
1998-02