DSPIC30F1010-30I/MM Microchip Technology, DSPIC30F1010-30I/MM Datasheet - Page 24

• Manufacturer Part Number: DSPIC30F1010-30I/MM
• Description: 6KB, Flash, 256bytes-RAM, 30MIPS, 21I/O, 16-bit Family,nanoWatt 28 QFN-S 6x6mm T
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F1010-30I/MM

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 30 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 6KB (2K x 24)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-QFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DM300023 - KIT DEMO DSPICDEM SMPS BUCKDV164005 - KIT ICD2 SIMPLE SUIT W/USB CABLE
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

9.2.3
The QE_Code is a byte in the first word of the
response. This byte is used to return data for query
commands and error codes for all other commands.
When the programming executive processes one of the
two query commands (QBLANK or QVER), the returned
opcode is always PASS and the QE_Code holds the
query response data. The format of the QE_Code for
both queries is shown in
TABLE 9-2:
When the programming executive processes any
command other than a query, the QE_Code represents
an error code. Supported error codes are shown in
Table
returned QE_Code is set to 0x0, which indicates that
there is no error in the command processing. If the
verification of the programming for the PROGD, PROGP
or PROGC command fails, the QE_Code is set to 0x1.
For all other programming executive errors, the
QE_Code is 0x2.
DS70284C-page 24
QBLANK
QVER
Query
9-3. If a command is successfully processed, the
0x0F = Code memory is NOT blank
0xF0 = Code memory is blank
0xMN, where programming executive
software version = M.N
(i.e., 0x32, means software version 3.2)
QE_Code FIELD
QE_Code FOR QUERIES
Table
QE_Code
9-2.
TABLE 9-3:
9.2.4
The response length indicates the length of the
programming executive’s response in 16-bit words.
This field includes the 2 words of the response header.
With the exception of the response for the READD and
READP commands, the length of each response is only
2 words.
The response to the READD command is N + 2 words,
where N is the number of words specified in the READD
command.
The response to the READP command uses the
packed
Section 8.3 “Packed Data
an odd number of program memory words (N odd),
the response to the READP command is (3 •
(N + 1)/2 + 2) words. When reading an even number
of program memory words (N even), the response to
the READP command is (3 • N/2 + 2) words.
0x0
0x1
0x2
QE_Code
instruction
RESPONSE LENGTH
No error
Verify failed
Other error
QE_Code FOR NON-QUERY
COMMANDS
word
© 2010 Microchip Technology Inc.
Format”. When reading
Description
format
described
in