PIC16LC924-04/L Microchip Technology, PIC16LC924-04/L Datasheet - Page 84

• Manufacturer Part Number: PIC16LC924-04/L
• Description: IC,MICROCONTROLLER,8-BIT,PIC CPU,CMOS,LDCC,68PIN,PLASTIC
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16LC924-04/L

• Rohs Compliant: YES
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 4MHz
• Connectivity: I²C, SPI
• Peripherals: LCD, POR, PWM, WDT
• Number Of I /o: 25
• Program Memory Size: 7KB (4K x 14)
• Program Memory Type: OTP
• Ram Size: 176 x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 6 V
• Data Converters: A/D 5x8b
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 68-PLCC
• Processor Series: PIC16LC
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 176 B
• Interface Type: I2C, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 25
• Number Of Timers: 3
• Operating Supply Voltage: 2.5 V to 6 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000
• Minimum Operating Temperature: 0 C
• On-chip Adc: 8 bit, 5 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: PIC16LC924-04/LR; PIC16LC924-04/LR

PIC16C9XX
12.4
Example 12-2 show how to perform an A/D conversion.
The RA pins are configured as analog inputs. The ana-
log reference (V
rupt is enabled, and the A/D conversion clock is F
The conversion is performed on the RA0 pin
(channel0).
EXAMPLE 12-2: DOING AN A/D CONVERSION
;
;
;
;
DS30444E - page 84
Note:
Ensure that the required acquisition time for the selected input channel has elapsed.
Then the conversion may be started.
BCF
BSF
CLRF
BSF
BCF
MOVLW
MOVWF
BCF
BSF
BSF
BSF
:
:
A/D Conversions
The GO/DONE bit should NOT be set in
the same instruction that turns on the A/D.
STATUS, RP1
STATUS, RP0
ADCON1
PIE1,
STATUS, RP0
0xC1
ADCON0
PIR1,
INTCON, PEIE
INTCON, GIE
ADCON0, GO
REF
) is the device V
ADIE
ADIF
DD
. The A/D inter-
; Select Bank1
;
; Configure A/D inputs
; Enable A/D interrupts
; Select Bank0
; RC Clock, A/D is on, Channel 0 is selected
;
; Clear A/D interrupt flag bit
; Enable peripheral interrupts
; Enable all interrupts
; Start A/D Conversion
; The ADIF bit will be set and the GO/DONE bit
;
is cleared upon completion of the A/D Conversion.
RC
.
Clearing the GO/DONE bit during a conversion will
abort the current conversion. The ADRES register will
NOT be updated with the partially completed A/D con-
version sample. That is, the ADRES register will con-
tinue to contain the value of the last completed
conversion (or the last value written to the ADRES reg-
ister). After the A/D conversion is aborted, a 2T
is required before the next acquisition is started. After
this 2T
the selected channel.
AD
wait, an acquisition is automatically started on
1997 Microchip Technology Inc.
AD
wait