HEDR-5420-ES214 Avago Technologies US Inc., HEDR-5420-ES214 Datasheet - Page 11

• Manufacturer Part Number: HEDR-5420-ES214
• Description: ENCODER MODULE 200CPR 5MM
• Manufacturer: Avago Technologies US Inc.
• Series: HEDRr

Specifications of HEDR-5420-ES214

• Pulses Per Revolution: 200
• Encoder Type: Optical
• Output Type: Quadrature (Incremental)
• Voltage - Supply: 5VDC
• Actuator Type: 5mm Open Center
• Detent: No
• Built In Switch: No
• Mounting Type: Chassis Mount, Motors
• Orientation: Vertical
• Termination Style: Terminal Pins
• Number Of Channels: 2
• Mounting Style: Screw
• Output: Quadrature
• Shaft Type: Round
• Supply Voltage: 5 V
• Operating Temperature Range: 0 C to + 85 C
• Product: Optical
• Size / Dimension: 5 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Rotational Life (cycles Min): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

3. Press down the housing assem-
4. Using the end of a pen or other
bly, holding the set screw and
Allen wrench in their initial
position until the housing as-
sembly snaps into place. Rec-
ommended force is 3.5 kgf
minimum, 4.0 kgf nominal,
and 4.5 kgf maximum.
appropriate tool, press the
triangular portion of the hous-
ing assembly downward. Rec-
ommended force is between
3.5 kgf to 4.0 kgf. Then apply
a downward force on the end
of the Allen wrench. This sets
the codewheel position by
levering the codewheel upward
against internal guide of the
triangular piece. While con-
tinuing to apply a downward
force on both tools, rotate the
Allen wrench in the clockwise
direction until the hub set
screw is tightened against the
motor shaft. Remove the Allen
wrench by pulling it straight
out of the housing assembly.
When the triangular piece is
released, it should naturally
spring back to its original posi-
tion, eliminating contact be-
tween the housing assembly
and the codewheel. The en-
coder is now ready for use.
MOTOR
ALLEN WRENCH