A3245LUA Allegro Microsystems Inc, A3245LUA Datasheet - Page 2

• Manufacturer Part Number: A3245LUA
• Description: IC SW HALL EFFECT OMNI 3-SIP
• Manufacturer: Allegro Microsystems Inc
• Type: Omnipolar Switchr

Specifications of A3245LUA

• Sensing Range: ±55G Trip, ±6G Release
• Voltage - Supply: 3.6 V ~ 24 V
• Current - Supply: 3.5mA
• Output Type: Digital, Open Drain
• Features: Regulated Voltage
• Operating Temperature: -40°C ~ 150°C
• Package / Case: 3-SIP
• Magnetic Type: Omnipolar
• Operating Supply Voltage (min): 3.6V
• Operating Supply Voltage (typ): 5/9/12/15/18V
• Operating Supply Voltage (max): 24V
• Mag Sensor Operate Point (g): -15/55Gs
• Mag Sensor Release Point (g): -50/5Gs
• Mag Sensor Hysteresis(g): 18Gs
• Package Type: Ultra Mini SIP
• Pin Count: 3
• Mounting: Through Hole
• Operating Temp Range: -40C to 150C
• Operating Temperature Classification: Automotive
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Current - Output (max): -
• Lead Free Status / RoHS Status: Not Compliant, Contains lead / RoHS non-compliant

Features and Benefits
▪ Omnipolar operation
▪ Chopper stabilization
▪ Reverse battery protection
▪ Output short circuit protection
▪ Solid state reliability
▪ Small size
▪ Robust EMC capability
▪ High ESD ratings (HBM)
Packages: 3 pin SOT23W (suffix LH)
Not to scale
A3245-DS, Rev. 12
▫ Superior temperature stability
▫ Extremely low switchpoint drift
▫ Insensitive to physical stress
VCC
Chopper-Stabilized Omnipolar Hall-Effect Switches
Amp
Functional Block Diagram
Amp
Description
The A3245 integrated circuit is an omnipolar, ultrasensitive
Hall-effect switch with a digital output. This device has an
integrated regulator permitting operation to 24 V, making
it the first omnipolar switch available for operation to 24 V.
This device is especially suited for operation over extended
temperature ranges, up to +150°C. Superior high-temperature
performance is made possible through an Allegro
dynamic offset cancellation, which reduces the residual offset
voltage normally caused by device overmolding, temperature
excursions, and thermal stress.
The A3245 Hall-effect switch includes the following on a
single silicon chip: voltage regulator, Hall-voltage generator,
small-signal amplifier, chopper stabilization, Schmitt trigger,
and a short circuit protected open-drain output. Advanced
BiCMOS wafer fabrication processing is used to take advantage
of low-voltage requirements, component matching, very low
input-offset errors, and small component geometries.
The omnipolar operation of the A3245 allows activation with
either a north or a south polarity field of sufficient strength.
In the absence of a magnetic field, the output is off. This
Continued on the next page…
Regulator
To All Subcircuits
Current Limit
Control
GND
<1Ω
VOUT
A3245
®
patented