NFK3-SC FLUKE NETWORKS, NFK3-SC Datasheet - Page 62

• Manufacturer Part Number: NFK3-SC
• Description: LAN Tester
• Manufacturer: FLUKE NETWORKS

Specifications of NFK3-SC

• Lead Free Status / RoHS Status: na

OF-500 OptiFiber Certifying OTDR
Technical Reference Handbook
Step 1: Selecting Auto OTDR Mode
On the HOME screen, verify that Auto OTDR appears in the
upper-left corner of the screen. If it does not, press
Change Test; then select Auto OTDR.
Step 2: Selecting a Fiber Type and Test Limit
2-1 Press
2-2
2-3
2-4
2-14
Press
Use
then press
If the fiber type you want is not shown, press
More, select a FIBER GROUP; then highlight and select
a fiber type.
On the SETUP screen press
tab. If TEST LIMIT is already set to Document only, go
to step 3.
LM
S
t
to select FIBER TYPE.
; then press
t
to highlight the type of fiber you will test;
to select the fiber type.
D
E
Tab to select the Cable tab.
Tab to select the OTDR
B
A
2-5 Press
2-6 Use
Step 3: Selecting a Wavelength
3-1 From the SETUP screen, press
3-2 Change WAVELENGTH to Dual 850/1300 nm.
Step 4: Testing in the First Direction
4-1 Clean all fiber connectors.
4-2 Connect the launch fiber to the tester and to the
4-3 Press
t
If Document only is not listed, press
Application, then highlight and select Document only.
OTDR tab.
cabling. Figure 2-2 shows these connections and typical
features on an OTDR trace.
See page 3-13 for details on the OTDR Port
Connection Quality gauge shown on the OTDR
TESTING screen.
LM
to select the limit.
t
T
to see the available test limits.
to highlight Document only; then press
.
E
Tab to select the
B
More, select
-continued-