XF2L-1235-1 Omron, XF2L-1235-1 Datasheet - Page 23
![CONN FPC 12POS 0.5MM SMT](/photos/24/88/248865/4296088_sml.jpg)
XF2L-1235-1
Manufacturer Part Number
XF2L-1235-1
Description
CONN FPC 12POS 0.5MM SMT
Manufacturer
Omron
Series
XF2Lr
Specifications of XF2L-1235-1
Connector Type
Bottom Contacts
Number Of Positions
12
Pitch
0.020" (0.50mm)
Ffc, Fcb Thickness
0.30mm
Height Above Board
0.047" (1.20mm)
Mounting Type
Surface Mount, Right Angle
Cable End Type
Straight
Termination
Solder
Locking Feature
Slide Lock
Features
Zero Insertion Force (ZIF)
Contact Finish
Tin Alloy
Contact Finish Thickness
79µin (2.00µm)
Operating Temperature
-30°C ~ 85°C
Current Rating
0.500A
Voltage Rating
50V
Housing Material
Liquid Crystal Polymer (LCP)
Gender
Receptacle
Pitch Spacing
0.5mm
No. Of Contacts
12
No. Of Rows
1
Contact Plating
Gold
Ffc/fpc Thickness
0.3mm
Contact Termination
Surface Mount Vertical
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
OR683TR
XF2L12351
XF2L12351
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
XF2L-1235-1A
Manufacturer:
OMRON
Quantity:
33 368
XF
Operating the XF Rotary Backlock
FPC Connector Part Names
Handling Methods
Inserting the FPC
1. Insert the FPC all the way to the back of the connector.
2. Activate the slider (lever) and lock the FPC in place.
Removing the FPC
1. Move the slider (lever) upwards to disengage the locking
2. Once the lock has been disengaged, pull the FPC out.
The slider (lever) shown locked
The slider (lever) shown open
Slider (lever)
mechanism.
Circuit board
Housing
Terminal
Hold-down
FPC
Precautions during Use
Operating
1. Do not lock the slider (lever) without an FPC inserted.
2. Do not lock or unlock the slider (lever) with excessive
3. When locking the slider (lever), apply pressure with your
Locking the slider (lever) without an FPC inserted will
increase the force required to insert an FPC.
force.
Doing so may result in damage to the connector or con-
tact failure.
Do not use a slider (lever) if it becomes detached.
fingertips to both sides of the slider (lever) and then twist
the slider (lever) until it comes away from the unit. Failing
to lock the slider (lever) properly may result in contact fail-
ure.
Do not apply force horizontally to the PCB when locking
the slider (lever). Doing so may result in damage to the
connector or contact failure.
XF
23