XF2L-1235-1 Omron, XF2L-1235-1 Datasheet - Page 25
![CONN FPC 12POS 0.5MM SMT](/photos/24/88/248865/4296088_sml.jpg)
XF2L-1235-1
Manufacturer Part Number
XF2L-1235-1
Description
CONN FPC 12POS 0.5MM SMT
Manufacturer
Omron
Series
XF2Lr
Specifications of XF2L-1235-1
Connector Type
Bottom Contacts
Number Of Positions
12
Pitch
0.020" (0.50mm)
Ffc, Fcb Thickness
0.30mm
Height Above Board
0.047" (1.20mm)
Mounting Type
Surface Mount, Right Angle
Cable End Type
Straight
Termination
Solder
Locking Feature
Slide Lock
Features
Zero Insertion Force (ZIF)
Contact Finish
Tin Alloy
Contact Finish Thickness
79µin (2.00µm)
Operating Temperature
-30°C ~ 85°C
Current Rating
0.500A
Voltage Rating
50V
Housing Material
Liquid Crystal Polymer (LCP)
Gender
Receptacle
Pitch Spacing
0.5mm
No. Of Contacts
12
No. Of Rows
1
Contact Plating
Gold
Ffc/fpc Thickness
0.3mm
Contact Termination
Surface Mount Vertical
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
OR683TR
XF2L12351
XF2L12351
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
XF2L-1235-1A
Manufacturer:
OMRON
Quantity:
33 368
XF
Operating the XF Rotary Front Lock
FPC Connector Part Names
Handling Methods
Inserting the FPC
1. Use your fingernail on the center of the slider to twist the
slider until it comes away from the unit.
2. Securely insert the FPC so that it is perpendicular to the
connector and horizontal to the connector.
3. When locking the slider, apply pressure with your finger-
tips to the center of the slider, then twist the slider until it
comes away from the unit.
Removing the FPC
1. Unlock the slider by pushing it up, then remove the FPC.
Circuit
board
Terminal
Housing
Slider (lever)
FPC
Precautions during Use
Operating
1. The slider mechanism rotates around a rotary shaft.
2. The slider cannot be opened to an angle of more than
3. Lock and unlock the slider using the center of the slider.
4. As shown in the following figure, do not touch the termi-
5. Using the FPC in the follow ways may damage the FPC,
6. Make sure that the FPC has been inserted correctly and
Change in shape of tip of terminal
Operate the slider in a rotating movement.
125°. Do not apply force on the slider beyond that point.
Doing so may result in damage to the connector or con-
tact failure. Do not use the slider if it becomes detached.
Using the end of the slider may result in incomplete lock-
ing, damage, or contact failure.
nals with your fingernail or fingers if using the slider with-
out the FPC inserted. Doing so may cause the terminals
to change shape and result in contact failure.
change the shape of the contacts, or result in contact fail-
ure.
not backward.
Inserting the FPC incorrectly with the connecting face not
aligned with the customer's design specification may
damage the contacts and equipment may malfunction.
• Removing the FPC when the slider (lever) is still locked.
• Removing the FPC by pulling it up and down or from left
to right or twisting it sideways.
Rotating shaft
125°
Change in shape of
upper arm of terminal
XF
25