CV500II101 Omron, CV500II101 Datasheet - Page 38

• Manufacturer Part Number: CV500II101
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500II101

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Operation
Remarks
28
Operations
WRITE
1
1
5
The input display for the response monitor time and message number is the ini-
tial display produced when the Programming Console is turned on. In this exam-
ple, a response monitor time of 15 s and message number 1 are set.
Read/Don’t Read Setup
The NOT Key can be pressed to toggle between reading and not reading certain
information from the PC. If this information is read when the Programming Con-
sole is connected to a Remote I/O Slave Unit, at least 30 s will be required to read
the information before operation can be continued. If this information is not read,
the program read operation will be entered immediately.
If Programming Console operation is begun without reading the above informa-
tion from the PC, the following Programming Console functionality will be dis-
abled.
Response Monitor Time
Message Number
“I,” “Q,” and “H” will not be displayed to indicate I/O bits and words.
“H” will not be displayed to indicate holding bits and words.
All custom settings, including custom data areas and function codes, will be
disabled and addresses must be input using their normal default values.
Setting range: 2 to 60 s.
An error message will appear on the bottom of the display if there is no
response from the PC within the response monitor time that has been set. The
error message will disappear and the previous display will return the moment
the Programming Console receives a response. Refer to Section 5 Error Pro -
cessing for details on error messages.
Setting range: 0 to 7
The contents of the programmed message will automatically appear when a
MESSAGE instruction (MSG(195)) for the designated message number is
executed in the PC program.
Model/Version
Response monitor time
Message number
Read/don’t read PC Setup
Sets a response monitor time of 15 s.
Moves the cursor to the message number.
Sets message number 1.
Writes the values that have been set.
Section 4-4