103H5208-5240 SANYO DENKI - SANMOTION, 103H5208-5240 Datasheet - Page 62
![Stepper Motor](/photos/21/36/213617/4635655_sml.jpg)
103H5208-5240
Manufacturer Part Number
103H5208-5240
Description
Stepper Motor
Manufacturer
SANYO DENKI - SANMOTION
Datasheet
1.BS1D200P10.pdf
(64 pages)
Specifications of 103H5208-5240
No. Of Phases
Two
Inductance
9.5mH
Inertia
0.31oz-in
Step Resolution
1.8°
Peak Reflow Compatible (260 C)
No
Supply Voltage
24VDC
Current Rating
1A
Nema Size
17
Leaded Process Compatible
No
Torque Min
55.23in-oz
Rohs Compliant
Yes
Shaft Configuration
Bipolar
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
61
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Do not harm, forcibly put a stress, or load a heavy article on the cable or get
11. Perform wiring with the power cable as instructed by the wiring diagram or
12. Be sure not to touch the rotating part of the stepping motor during its
13. Neither reach or touch the electric terminals while electric power is on.
14. Never disconnect any of the connectors while electric power is on. Doing so may
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Perform wiring conforming to the technical standards of electric facility or
11. Ensure that wiring has been correctly done. Operating without correct
12. Take insulation process for the attached condenser or the external resistance
13. Do not climb or attach a heavy article on the product. Doing so may cause
14. Neither block nor stuff the aspiration/exhaust vent with a foreign particle.
15. Follow the instructions for the direction to place. Failure to do so may cause
16. Keep a distance as instructed by the Operation Manual for the driver from
17. Place the product with a great care so as to prevent from the danger such as
Do not use the product in an explosive, flammable or corrosive atmosphere, watery
place or near a combustible material. Doing so may cause injury or fire.
Have a person with expert knowledge for performing the transportation,
placement, wiring, operation, maintenance or inspection of the product.
Without such knowledge, it may cause an electric shock, injury or fire.
Do not work for wiring, maintenance servicing or inspection with the electric
power on. Perform either of those five minutes after turning the power off,
or otherwise, it may cause an electric shock.
When the protective functions of the product is activated, turn the power off
immediately and eliminate the cause. If continuing the operation without
eliminating the cause, the product may operate improperly and cause injury
or a breakdown of the system devices.
Stepping motor may run out of order at the operating and stopping
occasions, depending on the magnitude of the load. Put the product into use
after confirming with the adequate trial test operation in the maximum load
conditions that the product performs reliable operation. Doing otherwise
may cause a breakdown of the system. (Should the product run out of order
in the use to drive upward/downward, it may cause a fall of the load.)
Do not touch the internal parts of the driver. Doing so may cause an electric
shock.
Do not connect the stepping motor directly with the commercial power
outlet. Doing so may cause an electric shock, injury or fire. The power shall
be supplied to the stepping motor through the driving circuit.
Use the electric power source within the rated input voltage. Using
otherwise may cause fire or an electric shock.
Connect the driver and stepping motor to the ground. Using without
grounding may cause an electric shock.
it caught between the articles. Doing so may cause an electric shock.
the Operation Manual. Doing otherwise may cause an electric shock or fire.
operation. Touching it may cause injury.
Doing so may cause an electric shock.
cause an electric shock and corruption.
Prior to placement, operation, maintenance servicing or inspection, be sure
to read the Operation Manual and follow the instructions to perform those.
Failure to follow the instructions may cause an electric shock, injury or fire.
Do not use the driver or the stepping motor outside the specified conditions.
Doing so may cause an electric shock, injury or fire.
Do not insert a finger or a thing into the opening of the product. Doing so may cause
an electric shock, injury or fire.
Do not use the damaged driver or stepping motor. Doing so may cause
injury, fire or the like.
Use the driver and stepping motor in the designated combination. Using
otherwise may cause fire or a trouble.
Be careful that the temperature rises in the operating driver, stepping motor
or peripheral devices. Failure to be careful may cause a burn.
Unpack while confirming the ceiling. Failure to do so may cause injury.
Confirm if the product is the one having been ordered. Installing an incorrect
product may cause a breakdown.
Do not perform measurement of the insulation resistance or withstand
insulation voltage of the product. Doing so may cause a breakdown. Instead,
contact with us for such inspection.
the internal rule. Doing otherwise may cause burning or fire.
wiring may cause the stepping motor to run out of control and result in
injury.
connection terminals. Failure to do so may cause an electric shock.
injury.
Doing so may cause fire.
a trouble.
the inner surface of the control console or other devices. Failure to do so
may cause a trouble.
a tumble or a turnover.
<General matters>
<General matters>
<Unpacking>
<Placement>
DANGER
<Operation>
<Wiring>
<Wiring>
18. Mount the product on an incombustible material such as metal. Doing
22. Do not touch the product for a period after the power is on or has been turned
23. Stop the operation immediately when an emergency occurs. Failure to do so may
24. Do not change adjustment to an extreme, for such a change results in the unstable
25. When conducting the trial operation, make the stepping motor fixed firmly, and
26. When the alarm has been activated, eliminate the cause and ensure the
27. When the electric power recovers after the momentary interruption, do not
28. Confirm that the electric power supply is all proper conforming to the
29. The brake mechanism of the motor with the electro-magnetic brake is to
30. Fix the key firmly when operating the motor with key individually. Failure to
31. Be careful when performing maintenance services or inspection about the
32. It is recommended to replace the electrolytic condenser of the driver with a
33. Contact with us for repair. If the product is disassembled by the user, it may
34. Handle the product with care during transportation so as to prevent from the
35. Do not hold with the cable or the motor spindle. Doing so may cause a
36. When scrapping the driver or stepping motor, treat it for the general
1.
2.
3.
1.
2.
3.
4.
5.
19. Confirm the rotating direction before connecting with the mechanical
20. Do not touch the motor output spindle (including the key slot and gears) with a bare
21. The stepping motor is not equipped with any protective device. Take
otherwise may cause fire.
device. Failure to do so may cause injury or a breakdown.
hand. Doing so may cause injury.
protective measures using an over-current protective relay, a ground fault
interrupter, a protective device from excess temperature, and an emergency
stopping device. Failure to do so may cause injury or fire.
off, since the driver and stepping motor remain in the high temperature. Doing
so may cause burns. Especially the temperature rises considerably of the
stepping motor depending on the operating conditions. Use the motor on the
condition so that its surface temperature becomes 100°C or under.
cause an electric shock, injury or fire.
operation. Doing so may cause injury.
confirm the operation by disconnecting with the mechanical system before
connecting with it. Failure to do so may cause injury.
safety to resume operation. Failure to do so may cause injury.
approach the devices because the system may re-start operation by itself.
(Set the system so as to secure the safety even when it re-start on such
occasion.) Failure to do so may cause injury.
specifications. Failure to do so may cause a trouble.
hold the movable section and the motor position. Do not use it as a safety
measure, or doing so may cause the breakdown of the system.
do so may cause injury.
temperature which rises highly in the driver and stepping motor frame.
Failure to do so may cause burns.
new one for securing the preventive measure after using for 5 years, the
expected life in the average 40°C. The expected life of the fuse is 10 years
in the average 40°C. Thus, the periodical replacement is recommended.
put it out of action.
danger such as a tumble or a turnover.
trouble or injury.
industrial waste.
Avoid the place exposed to rain or water drops, or in an environment with
hazardous gas or liquid for storing the product. Failure to do so may cause a
trouble.
Do not assemble or repair the product. Doing so may cause fire or an
electric shock.
Do not remove the rating plate.
Store the product within the specified conservation temperature and
humidity in the place not exposed to the sun beam.
If the driver has been stored for a long period (3 years or longer for a guide),
consult with us. The capacitance may have decreased with the electrolytic
condenser due to the long period storage, and it may cause a trouble.
Install an external emergency stop circuit to turn the power off for the
instant halt of operation.
Put the product into operation in the specified ambient temperature and
humidity.
Excess loading of the product on the carrier may cause the load to fall in
pieces. Follow the instructions given outside the package.
COMPULSORY
<Maintenance services>
<Maintenance services>
PROHIBITED
<General matters>
<Transportation>
<Transportation>
CAUTION
<Retirement>
<Operation>
<Operation>
<Storage>
<Storage>