LSM-0.8/10-D12-C Murata Power Solutions Inc, LSM-0.8/10-D12-C Datasheet - Page 18

• Manufacturer Part Number: LSM-0.8/10-D12-C
• Description: DC/DC SM 10A 12-0.8V Non-Iso
• Manufacturer: Murata Power Solutions Inc
• Series: LSMr

Specifications of LSM-0.8/10-D12-C

• Product: Non-Isolated / POL
• Output Power: 8 W
• Input Voltage Range: 10.8 V to 13.2 V
• Input Voltage (nominal): 12 V
• Number Of Outputs: 1
• Output Voltage (channel 1): 0.8 V
• Output Current (channel 1): 10 A
• Output Type: Low Voltage
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

shipped in quantities of 150 modules per tape and reel.
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
Tel: [phone] [phone] Fax: [phone]
www.murata-ps.com
ISO 9001 REGISTERED
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not
imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change
without notice.
Murata Power Solutions' new-generation LSM SMT DC/DC converters are
(34.8)
1.370
DIMENSIONS
IN INCHES (mm)
email: [e-mail]
(62.0)
2.205
2.44
(56)
(14.97)
0.590
(52.4)
2.063
0.158
(4)
www.murata-ps.com
© 2008 Murata Power Solutions, Inc.
1
3/3/08
1
1.102
(28)
(15.36)
0.605
USA:
Canada:
UK:
France:
Germany: München, Tel: [phone], email: [e-mail]
Japan:
China:
Non-Isolated, 12V
1
Tucson (AZ), Tel: [phone], email: [e-mail]
Toronto, Tel: [phone], email: [e-mail]
Milton Keynes, Tel: [phone], email: [e-mail]
Montigny Le Bretonneux, Tel: [phone], email: [e-mail]
Tokyo, Tel: [phone], email: [e-mail]
Osaka, Tel: [phone], email: [e-mail]
Website: www.murata-ps.jp
Shanghai, Tel: [phone], email: [e-mail]
Guangzhou, Tel: [phone], email: [e-mail]
13.0 (330.2)
DIRECTION
7.38 (187.5)
TAPE
FEED
0.51(13.0)
Technical enquiries email: [e-mail], tel:
CENTERED
PICK UP
LOCATION
Figure 7. Tape Dimensions
Figure 8. Reel Dimensions
IN
LSM-10A D12 Models
NOTCH IN SHELL
INDICATES
PIN ONE.
, 0.75-5V
MDC_LSM 10A D12 Models.B01 Page 18 of 18
Product MUST be
reflowed with the
heat shield in
place.
The heat shield MUST
be removed after
reflow.
Failure to follow
these directions
will cause damage to
the product and void
the warranty.
Single Output
OUT
DC/DC Converters
CAUTION
PRESS TO REMOVE
THE HEAT SHIELD
AFTER THE SOLDER
PROCESS.
[phone]