3RV19011A SIEMENS, 3RV19011A Datasheet - Page 22
![AUXILIARY SWITCH, LATERALLY FIT](/photos/21/79/217923/42349946_sml.jpg)
3RV19011A
Manufacturer Part Number
3RV19011A
Description
AUXILIARY SWITCH, LATERALLY FIT
Manufacturer
SIEMENS
Datasheet
1.3RV19011A.pdf
(56 pages)
Specifications of 3RV19011A
Approval Bodies
UL, CSA, VDE
Contact Configuration
1 N/C + 1 N/O
No. Of Poles
2
Terminal Type
Screw
Accessory Type
Lateral Auxilary Contact
For Use With
-000 A
■
Accessories
Rotary operating mechanisms
Overview
Door-coupling rotary operating mechanisms
Motor starter protectors with a rotary operating mechanism can
be mounted in a control cabinet and operated externally by
means of a door-coupling rotary operating mechanism. When
the cabinet door with motor starter protector is closed, the
operating mechanism is coupled. When the motor starter
protector closes, the coupling is locked which prevents the door
from being opened unintentionally. This lock can be defeated by
the maintenance personnel. In the Open position, the rotary
operating mechanism can be secured against reclosing with up
to 3 padlocks. Inadvertent opening of the door is not possible in
this case either.
3RV19 26-0K door-coupling rotary operating mechanism
3RV19 26-2B door-coupling rotary operating mechanism for arduous
conditions
5/22
3RV Motor Starter Protectors up to 100 A
Siemens LV 1 · 2006
Remote motorized operating mechanisms
3RV1 motor starter protectors are manually operated controls.
They automatically trip in case of an overload or short-circuit.
Intentional remote-controlled tripping is possible by means of a
shunt release or an undervoltage release. Reclosing is only
possible directly at the motor starter protector.
The remote motorized operating mechanism allows the motor
starter protectors to be opened and closed by electrical
commands. This enables a load or an installation to be isolated
from the power system or reconnected to it from an operator
panel.
If the motor starter protector is tripped as a result of overload or
short-circuit, it will be in tripped position. For reclosing, the
remote motorized operating mechanism must first be set
manually or electrically to the 0 position (electrically by means of
the Open command). Then it can be reclosed.
The remote motorized operating mechanism is available for
motor starter protectors of size S2 (I
(I
230 V AC and 24 V DC. The motor starter protector is fitted into
the remote motorized operating mechanism as shown in the
drawing.
In the "MANUAL" position, the motor starter protector in the
remote motorized operating mechanism can continue to be
switched manually on site. In the "AUTOMATIC" position, the
motor starter protector is switched by means of electrical
commands. The switching command must be applied for a
minimum of 100 ms. The remote motorized operating
mechanism closes the motor starter protector after a maximum
of 1 second. On voltage failure during the switching operation it
is ensured that the motor starter protector remains in the Open
or Closed position.
Reset function
The RESET button on the motorized operating mechanism
serves to reset any 3RV19 21-1M alarm switch that might be
installed.
nmax
= 100 A) that are designed for control voltages of
nmax
= 50 A) and S3