ACPM-7372-BLK Avago Technologies US Inc., ACPM-7372-BLK Datasheet - Page 4

• Manufacturer Part Number: ACPM-7372-BLK
• Description: 4x4mm UMTS PA Module For Band 8
• Manufacturer: Avago Technologies US Inc.
• Type: Power Amplifierr

Specifications of ACPM-7372-BLK

• Current - Supply: 560mA
• Frequency: 880MHz ~ 915MHz
• Gain: 27dB
• Package / Case: 10-SMD Module
• Rf Type: W-CDMA
• Voltage - Supply: 3.2V ~ 4.2V
• Number Of Channels: 1
• Frequency (max): 915MHz
• Power Supply Requirement: Dual
• Single Supply Voltage (min): Not RequiredV
• Single Supply Voltage (typ): Not RequiredV
• Single Supply Voltage (max): Not RequiredV
• Package Type: SMD
• Dual Supply Voltage (typ): 3.4V
• Dual Supply Voltage (max): 4.2V
• Operating Temperature Classification: Commercial
• Operating Temp Range: -20C to 85C
• Pin Count: 10
• Mounting: Surface Mount
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Noise Figure: -
• P1db: -
• Test Frequency: -
• Lead Free Status / Rohs Status: Compliant

Electrical Characteristics for WCDMA Mode
– Conditions: �cc = 3.4�, �en = 2.6�, T = 25°C, �in/�out = 50ohm
– Signal Configuration: 3GPP (DPCCH + 1DPDCH) Up-�ink unless specified otherwise.
1. HSDPA
2. HSUPA
4
Characteristics
Harmonic Suppression
Gain at Harmonics
Input �SW�
Stability (Spurious Output)
�x Band Noise Power (�cc=4.2�)
GPS Band Noise (�cc=4.2�)
ISM Band Noise (�cc=4.2�)
Phase Discontinuity
�uggedness
- 3GPP TS 34.121-1
- User Equipment (UE) conformance specification; �adio transmission and reception (��DD); Part 1: Conformance specification
- Annex C (normative): Measurement channels
- C.10.1 U� reference measurement channel for HSDPA tests
- Table C.10.1.4: β values for transmitter characteristics tests with HS-DPCCH
- Sub-test 2 (CM=1.0dB, MP�=0.0dB)
- 3GPP TS 34.121-1
- User Equipment (UE) conformance specification; �adio transmission and reception (��DD); Part 1: Conformance specification
- Annex C (normative): Measurement channels
- C.11.1 U� reference measurement channel for E-DCH tests
- Table C.11.1.3: β values for transmitter characteristics tests with HS-DPCCH and E-DCH
- Sub-test 1 (CM=1.0dB, MP�=0.0dB)
Second
Third
Second and Third
3GPP (DPCCH + 1DPDCH) Up-�ink unless specified otherwise.
(DPCCH + 1DPDCH) Up-�ink unless specified otherwise.
DPCCH + 1DPDCH) Up-�ink unless specified otherwise.
, T = 25°C, �in/�out = 50ohm
T = 25°C, �in/�out = 50ohm
Condition
High Power Mode, Pout=28.5dBm
�oad �SW� 5:1, All phase
High Power Mode, Pout=28.5dBm
High Power Mode, Pout=28.5dBm
High Power Mode, Pout=28.5dBm
HPM↔MPM, Pout=17dBm
MPM↔BPM, Pout=8dBm
Pout<28.5dBm & Pin<5dBm, All phase,
High Power Mode
) Up-�ink unless specified otherwise.
Up-�ink unless specified otherwise.
Up-�ink unless specified otherwise.
Min.
Typ.
-45
-60
1.3
-135.5
-152
-159
10
20
Max.
-35
-40
0
2.5:1
-60
-134
-140
-144
45
45
8:1
Unit
dBc
dBc
dB
dBc
dBm/Hz
dBm/Hz
deg
deg
�SW�