AMMP-5620-TR2G Avago Technologies US Inc., AMMP-5620-TR2G Datasheet - Page 9

• Manufacturer Part Number: AMMP-5620-TR2G
• Description: 6-20 GHz High Gain Amp In SMT Pkg
• Manufacturer: Avago Technologies US Inc.

Specifications of AMMP-5620-TR2G

• Current - Supply: 95mA
• Frequency: 6GHz ~ 20GHz
• Gain: 17.5dB
• Noise Figure: 5.1dB
• P1db: 14.8dBm
• Package / Case: 8-SMD
• Rf Type: General Purpose
• Test Frequency: 18GHz
• Voltage - Supply: 5V
• Number Of Channels: 1
• Frequency (max): 20GHz
• Power Supply Requirement: Single
• Single Supply Voltage (typ): 5V
• Package Type: SMT
• Dual Supply Voltage (min): Not RequiredV
• Dual Supply Voltage (typ): Not RequiredV
• Dual Supply Voltage (max): Not RequiredV
• Supply Current: 130mA
• Pin Count: 8
• Mounting: Surface Mount
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Biasing and Operation
The AMMP-5620 only requires a single positive supply
connected to the Vd pin (2). The recommended supply
voltage is 5V. The supply should be bypassed with a 0.1uF
capacitor placed as close to the component as possible.
The package base is the RF and DC ground connection.
The biasing arrangement is shown in Figure 21.
Figure 22 shows a simplifies schematic for the amplifier
die. All three stages are self-biased as shown. Each stage
has feedback around it to control the gain, match and
performance, resulting in excellent wideband perfor-
mance. Also shown are the on-chip DC blocking capaci-
tors for both the RFin and RFout pins.
Please refer to the Absolute Maximum Ratings table for
allowed DC and thermal conditions.
9
Figure 21. Typical Application.
Figure 22. Simplified MMIC Schematics.
Recommended SMT Attachment
The AMMP Packaged Devices are compatible with high
volume
surface mount PCB assembly processes. The PCB material
and mounting pattern, as defined in the data sheet,
optimizes RF performance and is strongly recommend-
ed. An electronic drawing of the land pattern is available
upon request from Avago Sales & Application Engineer-
ing.
Figure 23. Demonstration Board (available upon request).