EVK-SH3000USB Semtech, EVK-SH3000USB Datasheet - Page 9

• Manufacturer Part Number: EVK-SH3000USB
• Description: Tools, Development Kit
• Manufacturer: Semtech

Specifications of EVK-SH3000USB

• Kit Contents: Evaluation Kit
• Tool / Board Applications: MicroBuddy Devices
• Development Tool Type: Hardware / Software - Eval/Demo Board
• Mcu Supported Families: SH3000
• For Use With: SH3000 MicroBuddy
• Lead Free Status / RoHS Status: na

SH3000 Evaluation Kit User Guide v0.96
SYSTEM MANAGEMENT
H. Force Code Violation – When the Watchdog timer is enabled, this button forces the program to send a
I.
J. Change Now – Updates the register table with the settings set in this window, and updates the MicroBuddy
K. Apply – Updates the register table only with the settings set in this window. By pressing the Registers tab, the
L. Watchdog Timer – This slider allows the user to set the watchdog timeout time.
M. This is a diagrammatic representation of pin 10 of the MicroBuddy. Pin 10 creates an Output_Low reset signal.
N. This is a diagrammatic representation of pin 11 of the MicroBuddy. Pin 11 creates an Output_High reset signal.
wrong codes to the MicroBuddy. RESET then occurs and the status window shows “Reset caused by Watchdog
code violation.”
Watchdog value – Effective watchdog time period within which the MCU must send a valid code to prevent
reset occurring.
immediately with these values.
user can see which registers are affected by this block.
2003-03
9
EVK-SH3000USB MicroBuddy™
Copyright ©2002-2003 Semtech Corporation
Evaluation Kit User Guide
www.semtech.co
Preliminary
m