SK-86R03 Fujitsu, SK-86R03 Datasheet - Page 14

• Manufacturer Part Number: SK-86R03
• Description: KIT, STARTER, JADE-L, MB86R03
• Manufacturer: Fujitsu
• Type: Evaluation Boardr

Specifications of SK-86R03

• Kit Contents: SK-86R03-01 Jade-L Eval Board, JTAG Debugger Mini-Board, TFT Display, Serial Cable, Power Supply, CD
• Mcu Supported Families: MB86R03
• Silicon Manufacturer: Fujitsu
• Features: RJ45 Ethernet Interface, SD-Card Interface, Dual
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

3.5 Ethernet
It is possible to establish a connection with a local area network. This allows you to connect
to a TFTP server to download software or to mount NFS filesystems. This has some
performance benefits compared to JTAG especially when downloading larger files.
The following requirements exist to be able to connect to a TFTP server:
3.5.1 Software Setup – TFTP Server
A TFTP server (software) running on your PC is required to transfer files between your PC
and the Jade-L Evaluation Board via the Ethernet interface.
Install the TFTP server software and configure it to use a local directory on the PC where
files to be run on the Jade-L Evaluation Board are stored. Configure the program settings so
14
A PC with:
A switch or hub
The Jade-L Evaluation Board
Monitor
Network cables, VGA or DVI cables
o a free COM port and RS232 cable
o a free ethernet (network) connection configured to use an APIPA IP address
o a terminal program (e.g. Tera Term Pro, which is available as freeware in the
o a TFTP server installation (available as freeware in the Internet e.g. tftpd32
(169.254.148.xxx, whereby xxx may not be 44 or 45, which are reserved for
the Jade-L Starterkit!)
Internet at
from
http://tftpd32.jounin.net/
http://ttssh2.sourceforge.jp/
)
)