USB-COM232-PLUS-1 FTDI, USB-COM232-PLUS-1 Datasheet - Page 14
![no-image](/images/no-image-200.jpg)
USB-COM232-PLUS-1
Manufacturer Part Number
USB-COM232-PLUS-1
Description
MODULE, DEV, USB-RS232, 1 COM PORT
Manufacturer
FTDI
Type
Development Mor
Datasheet
1.USB-COM232-PLUS1.pdf
(25 pages)
Specifications of USB-COM232-PLUS-1
Mcu Supported Families
FT232R
Kit Features
Works With USB 1.1 & 2.0 Host And Hub Ports, FIFO
Svhc
No SVHC (18-Jun-2010)
2.0 Host And Hub Ports, Fifo
128Byte Transmit Buffer, 256Byte Receive Buffer
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
3
3.1
3.1.1 USB
The USB-COM232-Plus1 is a downstream USB 2.0 Device. A standard USB Series “B” receptacle is
mounted inside the USB-F-1001 to facilitate connection to an upstream USB Host or Hub.
Table 3.1 – USB "B" Receptacle Pin-Out
3.1.2 RS232
The RS232 port is configured as Data Terminal Equipment (DTE), with a 9-contact D-Sub Pin connector.
Pin assignments are according to TIA/EIA-574 which formally defines the assignments for a COM port
found on many personal computers. In addition, Ring Indicator (RI) may be re-assigned to provide
+5VDC to an external device with a maximum current draw of 250mA once the USB-COM232-Plus1 has
been enumerated by the system.
Table 3.2 – DE-9P RS232 Pin-Out
Pin Number
Pin Number
Connections
Shield
Shield
External Connectors
1
2
3
4
1
2
3
4
5
6
7
8
9
Input / Power
Case Ground
Case Ground
Bidirectional
Bidirectional
Pin Type
Pin Type
Ground
Ground
Output
Output
Output
Power
Input
Input
Input
Input
Copyright © 2010 Future Technology Devices International Limited
Description
VBUS – USB Power provided from upstream USB Host or Hub
D– = USB data signal, negative polarity
D+ = USB data signal, positive polarity
GND = USB signal ground
Drain = typically connected to the host PC case
Description
DCD = Data Carrier Detect
RXD = Receive Data
TXD = Transmit Data
DTR = Data Terminal Ready
GND = RS232 signal ground
DSR = Data Set Ready
RTS = Request To Send
CTS = Clear To Send
RI = Ring Indicator or +5VDC @ 250mA max
Drain = typically connected to the host PC case
Document Reference No.: FT_000118
USB-COM232-PLUS1 Datasheet
Clearance No.: FTDI# 76
Version 1.2
13