USB-COM232-PLUS-1 FTDI, USB-COM232-PLUS-1 Datasheet - Page 9

• Manufacturer Part Number: USB-COM232-PLUS-1
• Description: MODULE, DEV, USB-RS232, 1 COM PORT
• Manufacturer: FTDI
• Type: Development Mor

Specifications of USB-COM232-PLUS-1

• Mcu Supported Families: FT232R
• Kit Features: Works With USB 1.1 & 2.0 Host And Hub Ports, FIFO
• Svhc: No SVHC (18-Jun-2010)
• 2.0 Host And Hub Ports, Fifo: 128Byte Transmit Buffer, 256Byte Receive Buffer
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

COM Port Assignment
Next, to determine which COM port has been assigned, open the Windows Device Manager from the
System Control Panel.
5) Wait while the driver is found, downloaded, and installed. This step may take a couple minutes
6) After the files are found and installed, click “Finish” to complete the installation.
7) Steps 2 through 6 will repeat. The first time installs the basic USB Serial Converter in the USB
8) When both portions of the device driver have been installed successfully, the following message
Figure 2.3 – Automatic Install
depending on the Internet speed.
Figure 2.4 - Complete Hardware Installation
device tree. The second time installs the Virtual COM Port layer in the Ports tree and assigns the
COM port number.
will appear, indicating that the device is ready.
Figure 2.5 - Hardware Ready
Copyright © 2010 Future Technology Devices International Limited
Document Reference No.: FT_000118
USB-COM232-PLUS1 Datasheet
Clearance No.: FTDI# 76
Version 1.2
8