EZ-4000-0357 LAMINA, EZ-4000-0357 Datasheet
EZ-4000-0357
Specifications of EZ-4000-0357
Related parts for EZ-4000-0357
EZ-4000-0357 Summary of contents
Page 1
... BL-4000 products. The EZConnect board is designed for use with all BL-4000 products and has mounting holes for Lamina’s optic and a built-in connector. A mating color coded wiring harness is also available. EZConnect boards are sold separately, or soldered to BL-4000 RGB+, Warm White and 5500K White light engines ...
Page 2
... Mechanical Dimensions Dimensions for the EZ-Connect boards (without BL-4000 light engines attached) and for the mating wiring harness: BL-4000 EZConnect Board – P/N EZ-4000-0357 All dimensions in inches [mm]. Mating AMP connector 173977-6 BL-4000 EZConnect Wiring Harness, P/N EZ-46WH-0354 Terminal 1 (0.546 [13.87]) All dimensions in inches [mm]. Mating AMP connector 3-292173-6 To see how you can realize all these design benefits, to request a sample speak with an engineer about your design, contact Lamina at 800 ...
Page 3
... Recommended epoxy is Loc-Tite OM-50/81501 two-part, room temperature curing epoxy equivalent. Adhesive should be applied to the optic holder legs and/or to the heat sink surface, below the holes in the EZ-Connect board. Care should be taken to prevent adhesive from coming in contact with the clear optic surfaces. In addition, to prevent the LED light engine, avoid contact or pressure on the light engine domes. More information on attachment of the lens to the light engine can be found in the optic attachment application note on Lamina’ ...