EZ-4000-0357 LAMINA, EZ-4000-0357 Datasheet - Page 3

• Manufacturer Part Number: EZ-4000-0357
• Description: EZCONNECT BOARD, ATLAS
• Manufacturer: LAMINA
• Type: Prototype Boardr

Specifications of EZ-4000-0357

• External Width: 25.4mm
• Board Thickness: 0.79mm
• Svhc: No SVHC (18-Jun-2010)
• External Length / Height: 34.29mm
• No. Of Holes: 7
• Pcb Hole Diameter: 4.39mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Lens and holder assembly (sold separately)
BL-4000 RGB+ Light engine attached to
Assembled BL-4000 Module
EZ-Connect Board along with optic, optic
holder, and wiring harness
Note: Optic is sold attached to the optic holder.
Soldering EZ-Connect Board to Lamina’s Light Engines
The recommended method for attaching Lamina’s light engines to the EZ-Connect boards can be found in Lamina’s
application note “Soldering BL-2000s and BL-4000s to Printed Wire Boards”, on Lamina’s website,
www.LaminaCeramics.com.
Assembly of Optics
The BL-4000 optic holders are designed to be inserted into the four corner holes in Lamina’s EZ-Connect board.The EZ-
Connect board is designed to align the optic to the center of the light engine and allow the optic to rest on the light engine
surface.
Attachment of the optic holder to the EZ-Connect board is performed using epoxy or a silicone based adhesive.
Recommended epoxy is Loc-Tite OM-50/81501 two-part, room temperature curing epoxy, or an equivalent. Adhesive
should be applied to the optic holder legs and/or to the heat sink surface, below the holes in the EZ-Connect board. Care
should be taken to prevent adhesive from coming in contact with the clear optic surfaces. In addition, to prevent
to
damage
the LED light engine, avoid contact or pressure on the light engine domes. More information on attachment of the lens to
the light engine can be found in the optic attachment application note on Lamina’s website.
Please visit Lamina’s website, www.LaminaCeramics.com, for more information on Lamina’s LED light engines and Lamina’s worldwide
distribution network.
Lamina Ceramics • 120 Hancock Lane • Westampton, NJ 08060 • USA
Specifications subject to change without notice • ©2005 Lamina Ceramics, Inc. • FM-0156 Rev -11.15.05
To see how you can realize all these design benefits, to request a sample, or to speak with an engineer
about your design, contact Lamina at 800.808.5822 or 609.265.1401 or visit www.laminaceramics.com.
3
FM-0156 REV - 11.15.05