8080-1G7 Tyco Electronics, 8080-1G7 Datasheet - Page 79

• Manufacturer Part Number: 8080-1G7
• Description: TRANSISTOR SOCKET, 3POS, THROUGH HOLE
• Manufacturer: Tyco Electronics

Specifications of 8080-1G7

• Connector Type: TO-3 Socket
• No. Of Contacts: 3
• Pitch Spacing: 5.46mm
• Contact Termination: Solder
• Contact Material: Beryllium Copper
• Contact Plating: Gold
• Socket Mounting: PC Board
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

FEATURES:
The 8046 Series micro-miniature PC board mounting test jack uses the
absolute minimum amount of PC board space. It can be used both as a test
jack and an electromechanical interface for mother and daughter boards.
The 8046-6G Series is qualified to MIL-C-39024/18. This series test jack
accomodates .080" (2,03) diameter probes or interface pins. Commercial
versions are available.
• Low profile for close board-to-board spacing
• Can be mounted in a row on .200" (5,08) centers
• Ten brilliant insulation colors available for quick test point reference
• Low cost and high reliability
MATERIAL SPECIFICATIONS:
Insulator............................Teflon
Contact ............................Phosphor bronze
Plating ..............................Gold
8046 Series Commercial
Products for Industrial &
Commercial Applications
8046-1G2
Dimensions are shown for
reference purposes only.
Specialty Sockets
Micro-Miniature Test Jacks
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
PERFORMANCE SPECIFICATIONS:
MECHANICAL
Vibration ..........................15 G's @ 10 to 2,000 Hz per MIL-STD-202,
Mechanical Shock............100 G's per MIL-STD-202, Method 213
Durability ........................150 Insertion and withdrawal cycles
Insertion Force ................10 Lbs. max.
Withdrawal Force ............0.5 Lbs. min.
Solderability ....................Passed MIL-STD-202, Method 208
ELECTRICIAL
Bulk Contact
Current Rating..................5 Amps DC
Operating Voltage ............1,000 Volts RMS @ sea level, 350 Volts RMS
Dielectric Withstanding
Insulation Resistance........5,000 x 10
Capacitance ......................1pF
ENVIRONMENTAL
Operating Temperature ....-65°C to +150°C
Salt Spray ........................4 Milliohms @ 5 Amps, MIL-STD-202,
Humidity ..........................1,000 x 10 6 Ohms per MIL-STD-202, Method 103
Thermal Shock ................-65°C to +200°C per MIL-STD-202, Method 107
NOTE: Military Test Reference Applies Specifically to MIL-Qualified Components.
Resistance ......................4 Milliohms @ 5 Amps, military;
Voltage ..........................1,500 Volts RMS @ sea level, 350 Volts RMS
Specifications subject to
change.
5 milliohms @ 5 Amps commercial
Method 204
@ 50,000 feet
@ 50,000 feet, MIL-C-39024, test 2 for
15 seconds
Method 101
6
Ohms
Technical Support Center
1-800-522-6752
www.tycoelectronics.com
Catalog 1307612
Revised 7-01
5079
5