SFH 320 FA-4-Z OSRAM Opto Semiconductors Inc, SFH 320 FA-4-Z Datasheet - Page 8

• Manufacturer Part Number: SFH 320 FA-4-Z
• Description: Photodetector Transistors PHOTOTRANSISTOR
• Manufacturer: OSRAM Opto Semiconductors Inc
• Type: IR Chipr

Specifications of SFH 320 FA-4-Z

• Maximum Power Dissipation: 165 mW
• Maximum Dark Current: 50 nA
• Fall Time: 8 us
• Maximum Operating Temperature: + 100 C
• Minimum Operating Temperature: - 40 C
• Rise Time: 8 us
• Package / Case: PLCC-2
• Package: 2PLCC
• Phototransistor Type: Phototransistor
• Polarity: NPN
• Lens Shape Type: Flat
• Lens Dimensions: 2.4 mm
• Viewing Orientation: Top View
• Half Intensity Angle Degrees: 120 °
• Maximum Collector Current: 15 mA
• Maximum Rise Time: 8000 ns
• Peak Wavelength: 980 nm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Q65110A1836

SFH 320, SFH 320 FA
Published by
OSRAM Opto Semiconductors GmbH
Wernerwerkstrasse 2, D-93049 Regensburg
www.osram-os.com
© All Rights Reserved.
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances. For information on the types in question please contact our Sales Organization.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
1
2
components
, may only be used in life-support devices or systems
with the express written approval of OSRAM OS.
1
A critical component is a component usedin a life-support device or system whose failure can reasonably be expected
to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system.
2
Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain
and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.
2007-05-10
8