0638190200 Molex Inc, 0638190200 Datasheet - Page 3

• Manufacturer Part Number: 0638190200
• Description: HAND CRIMP TOOL
• Manufacturer: Molex Inc

Specifications of 0638190200

• Lead Free Status / RoHS Status: RoHS Not Applicable

Hand Crimp Tool For C-Grid III™ Female Crimp Terminals
Doc No: ATS-63819-0200 Release Date: 11-02-07
Revision: A
PRE-STRIPPED
4. Release the locator button, allowing the locator to return to the crimping
5. Close the tool handle until the first ratchet position engages. See
6. Insert the properly stripped wire through the terminal and against the
7. Crimp the terminal by squeezing the tool handles until the ratchet
Note: The tamper proof ratchet action will not release the tool until it has been fully closed.
8. Remove the crimped terminal from the terminal
9. Visually inspect the crimped terminal for proper
10. On some large O.D. wires, it may not be possible
WIRE
TERMINAL
position.
Figure 4.
wire stop. See Figure 5.
mechanism cycle has been completed. Release the handles to open
the jaws.
locator by pulling on the wire.
crimp location.
to insert the wire with the tool partially closed.
Those wires should be inserted with the hand tool
in the open position. Insert the wire above the
terminal in the punch and against the wire stop
then close the tool. See Figure 6.
Revision Date: 11-02-07
WIRE AGAINST THE
Figure 5
WIRE STOP
UNCONTROLLED COPY
WIRE
WIRE STOP IS PART
OF THE LOCATOR
POSITION
TERMINAL
WIRE STOP
OPEN
Figure 6
WIRE
FIRST RATCHET
TERMINAL
POSITION
CLOSE HANDLE
PARTIALLY
PARTIALLY
TOOLING
CLOSED
Figure 4
Page 3 of 7