V23993-EVA1035-H VINCOTECH, V23993-EVA1035-H Datasheet - Page 14

• Manufacturer Part Number: V23993-EVA1035-H
• Description: GPS Modules & Development Tools A1035-H GPS Eval Kit
• Manufacturer: VINCOTECH
• Type: Evaluation Boardr

Specifications of V23993-EVA1035-H

• Processor Used: SiRFStar III
• Operating Voltage: 3.3 V to 3.6 V
• Interface Type: USB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

6.3 ICC Jumper
Figure 10: ICC jumper
As long as the VCC DIP switch is “ON” the ICC jumper is bridged. By switching off
the VCC switch the current draw of the A1035-H GPS receiver can be measured
directly by connecting a low resistance measurement device to the ICC jumper.
The low resistance measurement device should be connected before VCC is
switched off!
7 NMEA Port
• Default setting: 4800 baud, 8 data bits, no parity, 1 stop bit, no flow control!
• Standard NMEA-0183 output on NMEA, baud rate selectable.
• Standard USB connectors
8 EVA1035-H Firmware and NMEA Sentences
See separate document GPS Firmware for a detailed description of the standard
firmware loaded onto the modules delivered with the EVA1035-H.
V1.0 – Feb-09
User’s Manual
Page 14 of 18