V23993-EVA1035-H VINCOTECH, V23993-EVA1035-H Datasheet - Page 7

• Manufacturer Part Number: V23993-EVA1035-H
• Description: GPS Modules & Development Tools A1035-H GPS Eval Kit
• Manufacturer: VINCOTECH
• Type: Evaluation Boardr

Specifications of V23993-EVA1035-H

• Processor Used: SiRFStar III
• Operating Voltage: 3.3 V to 3.6 V
• Interface Type: USB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

V1.0 – Feb-09
(3) Either assure that the on-module GPS antenna has good view to the sky or con-
(4) To start the GPS Cockpit software which visualizes the NMEA output data com-
(5) Now you need to activate the correct port within GPS Cockpit. You can do this
nect the included GPS antenna to the EVA1035-H via the external antenna con-
nector and make sure this active antenna has a good view to the sky! Make sure
the right antenna input is activated by setting the ANT_SW DIP to the “OFF” po-
sition fgor the on module antenna or to the “ON” position for the external an-
tenna.
ing from the GPS receiver, copy all files from the included CD ROM “Tools/GPS
Cockpit” to a folder of you choice on your PC. Then double click the GPSC.exe
file. The GPS cockpit software starts without additional software installation.
by selecting “COM port connection”. A detailed description of the GPS Cockpit
software is included on the CD ROM. In any case, the following window will ap-
pear:
Activate “Terminal 1”, choose the COM port to which the GPS receiver is con-
nected (verify in your system settings - device manager, which communication
port is used for this USB serial connection), in our example COM2 at 4800 baud
(default setting for the EVA1035-H), and click on “OK”:
Figure 3: GPS Cockpit communication window - blank
Figure 2: Disabling of Microsoft Serial BallPoint
Update Driver
Disable
Uninstall
Scan for hardware changes
Properties
User’s Manual
Page 7 of 18