FCTN-RLY4-315 Linx Technologies Inc, FCTN-RLY4-315 Datasheet - Page 5

• Manufacturer Part Number: FCTN-RLY4-315
• Description: RF Modules & Development Tools 4 Relay Receiver Module 315MHz
• Manufacturer: Linx Technologies Inc

Specifications of FCTN-RLY4-315

• Board Size: 146.7 mm x 81.3 mm x 45 mm
• Minimum Operating Temperature: - 40 C
• Supply Voltage (min): 5 V
• Product: RF Modules
• Maximum Frequency: 315 MHz
• Supply Voltage (max): 16 V
• Supply Current: 12 mA to 170 mA
• Maximum Operating Temperature: + 85 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

TRANSMITTERS
Page 8
The Relay Function Module incorporates a Linx LR Series receiver paired with a
Holtek HT658 decoder IC. This means that there are several options available
for controlling the module.
The first option is to use one of the
pre-certified OEM transmitters offered
by Linx. These transmitters come in
several
customized to bear the logo or other
artwork required by the customer. The
only setup required by the customer is
to set the address of the transmitter
and the Relay Module.
There are four OEM transmitters that
can be used with the Relay Function
Module: the Full Size Handheld, the
Compact Handheld, the Long-Range Handheld, and the Keyfob. The Full Size
Handheld uses the same eight address lines used by the Relay Function
Module, so they only need to be set the same for proper function.
The other three transmitters use all ten address lines offered by the Holtek ICs
while the Relay Function Module uses eight. This means that the last two
address lines on the transmitters (A8 and A9) must be left floating (turn off the
DIP switches on the handhelds, cut traces 8 and 9 on the Keyfob). The other
address lines can be set to whatever the user desires, as long as the transmitter
and the Relay Function Module match.
A custom transmitter can also be created with a KH Series transmitter or an LC
or LR Series transmitter paired with a Holtek HT640 encoder or microprocessor.
Because the Holtek ICs have 10 address lines, the last two lines (A8 and A9)
must be left open. The Holtek address lines are tri-state, meaning that they have
three valid input conditions: high, low, or floating. The Relay Function Module
uses only the low and floating states, so the custom transmitter can only use
these states as well. The lines that are floating should be left open and have no
electrical connection.
It should be noted that the Keyfob
transmitter does not allow full
functionality of the Relay Function
Module. Each of the four relays in
the module uses two data lines for a
total of eight. The Keyfob transmitter
offers a maximum of five buttons, so
at most, it can control two relays in
latched operation and three in
momentary operation.
Application
describes in detail how to set the
Relay Function Module address to
match any of the transmitters offered by Linx. This note can be found in the
Support section of the Linx web site, www.linxtechnologies.com.
packages
Note
and
AN-00300
can
be
Figure 8: Keyfob Button / Relay Relationships
Figure 7: Pre-Certified Transmitters
RE4
ON
RE3
OFF
RE4
OFF
RE2
ON
RE3
ON
ONLINE RESOURCES
www.linxtechnologies.com
• Latest News
• Data Guides
• Application Notes
• Knowledgebase
• Software Updates
If you have questions regarding any Linx product and have Internet access,
make www.linxtechnologies.com your first stop. Our website is organized in an
intuitive format to immediately give you the answers you need. Day or night, the
Linx website gives you instant access to the latest information regarding the
products and services of Linx. It’s all here: manual and software updates,
application notes, a comprehensive knowledgebase, FCC information, and much
more. Be sure to visit often!
www.antennafactor.com
The Antenna Factor division of Linx offers
a diverse array of antenna styles, many of
which are optimized for use with our RF
modules. From innovative embeddable
antennas to low-cost whips, domes to
Yagis, and even GPS, Antenna Factor
likely has an antenna for you, or can
design one to meet your requirements.
www.connectorcity.com
Through its Connector City division, Linx offers a wide
selection of high-quality RF connectors, including FCC-
compliant types such as RP-SMAs that are an ideal
match for our modules and antennas. Connector City
focuses on high-volume OEM requirements, which
allows standard and custom RF connectors to be offered
at a remarkably low cost.
®
Page 9