ADAU1701JSTZ-RL Analog Devices Inc, ADAU1701JSTZ-RL Datasheet - Page 49

• Manufacturer Part Number: ADAU1701JSTZ-RL
• Description: IC,Audio Processor,QFP,48PIN,PLASTIC
• Manufacturer: Analog Devices Inc
• Series: SigmaDSP®r
• Type: Audio Processorr

Specifications of ADAU1701JSTZ-RL

• Design Resources: Analog Audio Input, Class-D Output with ADAU1701, SSM2306, and ADP3336 (CN0162)
• Applications: Automotive, Monitors, MP3
• Mounting Type: Surface Mount
• Package / Case: 48-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: EVAL-ADAU1701MINIZ - BOARD EVAL SIGMADSP AUD ADAU1701EVAL-ADAU1701EBZ - BOARD EVAL FOR ADAU1701
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

LAYOUT RECOMMENDATIONS
PARTS PLACEMENT
The ADC input voltage-to-current resistors and the ADC current
set resistor should be placed as close as possible to the 2, 3, and
4 input pins.
All 100 nF bypass capacitors, which are recommended for every
analog, digital, and PLL power/ground pair, should be placed as
close as possible to the ADAU1701. The 3.3 V and 1.8 V signals
on the board should also each be bypassed with a single bulk
capacitor (10 μF to 47 μF).
Rev. A | Page 49 of 56
All traces in the crystal oscillator circuit (Figure 14) should be
kept as short as possible to minimize stray capacitance. In addition,
avoid long board traces connected to any of these components
because such traces may affect crystal startup and operation.
GROUNDING
A single ground plane should be used in the application layout.
Components in an analog signal path should be placed away
from digital signals.
ADAU1701