DSPIC33EP256MU810-I/PT Microchip Technology, DSPIC33EP256MU810-I/PT Datasheet - Page 257

• Manufacturer Part Number: DSPIC33EP256MU810-I/PT
• Description: 100 PINS, 256KB Flash, 28KB RAM, 60 MHz, USB, 2xCAN, 15 DMA 100 TQFP 12x12x1mm T
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33EPr

Specifications of DSPIC33EP256MU810-I/PT

• Embedded Interface Type: I2C, SPI, UART
• No. Of I/o's: 83
• Flash Memory Size: 280KB
• Supply Voltage Range: 3V To 3.6V
• Operating Temperature Range: -40°C To +85°C
• Digital Ic Case Style: TQFP
• No. Of Pins: 100
• Rohs Compliant: Yes
• Processor Series: DSPIC33E
• Core: dsPIC
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 60 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, QEI, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 83
• Program Memory Size: 256KB (85.5K x 24)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 12K x 16
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 32x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP
• Lead Free Status / Rohs Status: Details

14.0
FIGURE 14-1:
 2009-2011 Microchip Technology Inc.
Trigger and
Sync Sources
Note 1:
Note 1: This data sheet summarizes the features
IC Clock
Sources
dsPIC33EPXXXMU806/810/814 and PIC24EPXXXGU810/814
ICx Pin
2: Some registers and associated bits
INPUT CAPTURE
of the dsPIC33EPXXXMU806/810/814
and PIC24EPXXXGU810/814 families of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to Section 12. “Input Cap-
ture” (DS70352) of the “dsPIC33E/
PIC24E
which is available from the Microchip web
site (www.microchip.com).
described in this section may not be
available on all devices. Refer to
Section 4.0 “Memory Organization”
this data sheet for device-specific register
and bit information.
The Trigger/Sync source is enabled by default and is set to Timer3 as a source. This timer must be enabled for
proper ICx module operation or the Trigger/Sync source must be changed to another source option.
ICTSEL<2:0>
Trigger and
Sync Logic
Prescaler
INPUT CAPTURE MODULE BLOCK DIAGRAM
Counter
1:1/4/16
Family Reference Manual”,
Select
Clock
Increment
Reset
ICM<2:0>
SYNCSEL<4:0>
Trigger
Clock Synchronizer
Edge Detect Logic
(1)
ICxTMR
and
Preliminary
in
The Input Capture module is useful in applications
requiring frequency (period) and pulse measurement.
The
PIC24EPXXXGU810/814 devices support up to 16
input capture channels.
Key features of the Input Capture module include:
• Hardware-configurable for 32-bit operation in all
• Synchronous and Trigger modes of output
• A 4-level FIFO buffer for capturing and holding
• Configurable interrupt generation
• Up to six clock sources available for each module,
16
modes by cascading two adjacent modules
compare operation, with up to 30 user-selectable
trigger/sync sources available
timer values for several events
driving a separate internal 16-bit counter
Note:
dsPIC33EPXXXMU806/810/814
Only IC1, IC2, IC3 and IC4 can trigger a
DMA data transfer. If DMA data transfers
are required, the FIFO buffer size must be
set to ‘1’ (ICI<1:0> = 00)
4-Level FIFO Buffer
ICOV, ICBNE
Event and
ICI<1:0>
Interrupt
ICxBUF
Logic
Set ICxIF
DS70616E-page 257
16
System Bus
16
and