DSPIC33FJ16MC102-I/SP Microchip Technology, DSPIC33FJ16MC102-I/SP Datasheet - Page 205

• Manufacturer Part Number: DSPIC33FJ16MC102-I/SP
• Description: 16-bit Motor Control DSC Family, 16 MIPS, 16KB Flash, 1KB RAM 28 SPDIP .300in TU
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ16MC102-I/SP

• Processor Series: dsPIC33F
• Core: dsPIC
• Data Bus Width: 16 bit
• Program Memory Type: Flash
• Program Memory Size: 16 KB
• Interface Type: SPI, I2C, UART, JTAG
• Number Of Programmable I/os: 35
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Development Tools By Supplier: MPLAB IDE Software
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 13 Channel
• Embedded Interface Type: I2C, SPI, UART
• No. Of I/o's: 21
• Flash Memory Size: 16KB
• Supply Voltage Range: 3V To 3.6V
• Operating Temperature Range: -40°C To +85°C
• Digital Ic Case Style: DIP
• No. Of Pins: 28
• Rohs Compliant: Yes
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 16 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 21
• Eeprom Size: -
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-DIP (0.300", 7.62mm)
• Lead Free Status / Rohs Status: Details

REGISTER 20-2:
© 2011 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15
bit 14
bit 13
bit 12-10
bit 9
bit 8
bit 7-6
dsPIC33FJ16GP101/102 AND dsPIC33FJ16MC101/102
R/W-0
R/W-0
CON
EVPOL<1:0>
CON: Comparator Enable bit
1 = Comparator is enabled
0 = Comparator is disabled
COE: Comparator Output Enable bit
1 = Comparator output is present on the CxOUT pin
0 = Comparator output is internal only
CPOL: Comparator Output Polarity Select bit
1 = Comparator output is inverted
0 = Comparator output is not inverted
Unimplemented: Read as ‘0’
CEVT: Comparator Event bit
1 = Comparator event according to EVPOL<1:0> settings occurred; disables future triggers and
0 = Comparator event did not occur
COUT: Comparator Output bit
When CPOL = 0 (non-inverted polarity):
1 = V
0 = V
When CPOL = 1 (inverted polarity):
1 = V
0 = V
EVPOL<1:0>: Trigger/Event/Interrupt Polarity Select bits
11 = Trigger/Event/Interrupt generated on any change of the comparator output (while CEVT = 0)
10 = Trigger/Event/Interrupt generated only on high to low transition of the polarity-selected
01 = Trigger/Event/Interrupt generated only on low to high transition of the polarity-selected
00 = Trigger/Event/Interrupt generation is disabled
R/W-0
R/W-0
interrupts until the bit is cleared
COE
IN
IN
IN
IN
comparator output (while CEVT = 0)
comparator output (while CEVT = 0)
If CPOL = 1 (inverted polarity):
Low-to-high transition of the comparator output
If CPOL = 0 (non-inverted polarity):
High-to-low transition of the comparator output
If CPOL = 1 (inverted polarity):
High-to-low transition of the comparator output
If CPOL = 0 (non-inverted polarity):
Low-to-high transition of the comparator output
CMxCON: COMPARATOR CONTROL REGISTER
+ > V
+ < V
+ < V
+ > V
IN
IN
IN
IN
-
-
-
-
‘1’ = Bit is set
W = Writable bit
R/W-0
CPOL
U-0
—
R/W-0
CREF
U-0
Preliminary
—
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
U-0
U-0
—
—
U-0
U-0
—
—
x = Bit is unknown
R/W-0
R/W-0
CEVT
CCH<1:0>
DS70652C-page 205
R/W-0
COUT
R/W-0
bit 8
bit 0