MTCMR-C1-GP-N2 Multi-Tech Systems, MTCMR-C1-GP-N2 Datasheet - Page 89

• Manufacturer Part Number: MTCMR-C1-GP-N2
• Description: MODEM CELLULAR DUAL CDMA
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iCellr

Specifications of MTCMR-C1-GP-N2

• Function: Transceiver, CDMA, Modem
• Modulation Or Protocol: CDMA2000
• Frequency: 800MHz, 1.9GHz, 1575.42MHz
• Applications: Sprint Networks (USA)
• Interface: RS-232, USB
• Sensitivity: -161dB
• Data Rate - Maximum: 153.6kbps
• Voltage - Supply: 9 V ~ 32 V, USB
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1096

Quick Net Connect $QCQNC
Description:
Syntax:
Values:
Set Data Service Option $QCSO
Description:
Values:
Syntax:
Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide (PN S000478C)
Chapter 16 – Data Commands
This command is used to enable or disable the Quick Net Connect (QNC) feature.
Command syntax: AT$QCQNC=<Val>
<Val>
This command is used to Set Data Service Option number set; saves to non-volatile memory.
<Val>
Command syntax: AT$QCSO =<Val>
Command
AT$QCQNC?
Note: Display the current setting
AT$QCQNC=?
Note: Display the range of values
AT$QCQNC=1
Note: Enable QNC compatibility
AT$QCQNC
Note: Default – Enable QNC compatibility
Command
AT$QCSO?
Note: Display the current setting
AT$QCSO =?
Note: Display the range of values
AT$QCSO =1
Note: Set proprietary SO numbers.
0
1
0
1
2
pre-707 SO numbers (RS 1: Async 4, packet 7; RS 2: Async 12, packet 15)
proprietary SO numbers (RS 1: Async 4, packet 7; RS 2: Async 0x8021, packet 0x8020)
IS-707 SO numbers (RS 1: Async 0x1004, packet 0x1007; RS 2: Async 12, packet 15)
Disable QNC capability. This means that packet Originations will use the Packet Data
Service Option number.
Enable QNC capability. This means that Packet Originations will use the
Asynchronous Data Service Option number. Default.
Possible Responses
$QCSO: 2
OK
Note: Command is valid
$QCSO: (0-2)
OK
Note: Command is valid
OK
Note: Command is valid
Possible Responses
$QCQNC: 0
OK
Note: Command is valid
$QCQNC: (0-1)
OK
Note: Command is valid
OK
Note: Command is valid
OK
Note: Command is valid
Chapter 16 – Data Commands
89