8808A 120V Fluke Electronics, 8808A 120V Datasheet - Page 49
![DMM 5.5 RES RS-232 INTERFACE](/photos/27/4/270432/8808a-120v_sml.jpg)
8808A 120V
Manufacturer Part Number
8808A 120V
Description
DMM 5.5 RES RS-232 INTERFACE
Manufacturer
Fluke Electronics
Type
Digital (DMM)r
Specifications of 8808A 120V
Includes
Test Leads
Style
Bench
Display Digits
5.5
Display Type
VFD, Dual
Display Count
200000
Function
Voltage, Current, Resistance, Frequency
Functions, Extra
Continuity, dB, Diode Test
Features
Hold, Min/Max, RS-232 Port
Ranging
Auto/Manual
Response
True RMS
Lead Free Status / RoHS Status
Not applicable / RoHS non-compliant
Other names
614-1068
Diode / Continuity Testing
Press G to toggle between the continuity and diode test functions for the primary
display. (These functions cannot be selected for the secondary display.)
To perform a continuity test:
To perform a diode or transistor junction test:
1. If required, press G to select the continuity test function.
2. Connect the test leads between the Meter and the circuit under test as shown in
1. If required, press G to select the diode test function.
2. Connect the test leads between the Meter and the diode or transistor junction as
Figure 3-10.
The beeper emits a continuous tone if the input is below 20 e.
shown in Figure 3-11.
The forward voltage of the semiconductor junction (or junctions) is measured.
Readings are displayed in the 2 V range at the fast measurement rate. The Meter
displays 0L if the input is above +2 V.
Figure 3-10. Continuity Test
Operating the Meter from the Front Panel
Selecting a Measurement Function
2W/4W
1000V
750V
mA
LO
HI
200 mA
MAX
MAX
V
INPUT
1000 V
600 V
500 V pk
10 A
MAX
1V
CAT I
CAT II
SENSE
4 W
300V
10A
LO
HI
eue15.eps
3-15
3