8808A/SU 120V Fluke Electronics, 8808A/SU 120V Datasheet - Page 85

• Manufacturer Part Number: 8808A/SU 120V
• Description: USB CABLE KIT SW DMM 5.5 RES
• Manufacturer: Fluke Electronics
• Type: Digital (DMM)r

Specifications of 8808A/SU 120V

• Includes: Test Leads
• Style: Bench
• Display Digits: 5.5
• Display Type: VFD, Dual
• Display Count: 200000
• Function: Voltage, Current, Resistance, Frequency
• Functions, Extra: Continuity, dB, Diode Test
• Features: Hold, Min/Max, RS-232 Port
• Ranging: Auto/Manual
• Response: True RMS
• Lead Free Status / RoHS Status: Not applicable / RoHS non-compliant
• Other names: 614-1069

Miscellaneous Commands and Queries
RS-232 Remote / Local Configurations
^C (CONTRL C)
FORMAT <format>
FORMAT?
PRINT <rate>
SERIAL?
Volts dc
Volts ac
Amps dc
Amps ac
Resistance
Frequency
DIODE
Continuity Test
Command
Table 4-15 describes miscellaneous commands and queries.
Table 4-17 describes the RS-232 remote and local configuration commands, which are
used with the RS-232 interface to set up the remote/local configuration of the Meter.
These commands are valid only when the RS-232 interface is enabled.
Measurement Function
Table 4-16. Measurement Units Output with Format 2
Table 4-15. Miscellaneous Commands and Queries
Causes =><CR><LF> to be output.
Set output <format> to 1 or 2.
Format 1 outputs measurement values without measurement units (VDC,
ADC, OHMS, etc.).
Format 2 allows measurement units to be output with measurement units.
(See Table 4-16.) Format 2 primarily is used with RS-232 print-only mode.
Returns the format in use (1 or 2).
Sets print rate for print mode. See Table 4-2.
Returns Meter’s serial number.
Operating the Meter Using the Computer Interface
Description
Units Output
Computer Interface Command Set
OHMS
OHMS
VDC
ADC
VDC
VAC
AAC
HZ
4-25
4