7-435470-1 Tyco Electronics, 7-435470-1 Datasheet - Page 2

• Manufacturer Part Number: 7-435470-1
• Description: DIP SW ASSY-BLK EXT ACT-2POS
• Manufacturer: Tyco Electronics

Specifications of 7-435470-1

• Rohs Information: 7-435470-1
• Circuit: SPDT
• Number Of Positions: 2
• Contact Rating @ Voltage: 0.1A @ 5VDC
• Actuator Type: Standard
• Actuator Level: Raised
• Mounting Type: Through Hole
• Orientation: Top Actuated
• Washable: No
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3.2.
3.3.
3.4.
Product is designed to m eet electrical, m echanical and environm ental perform ance requirem ents specified in
Figure 1. Unless otherwise specified, all tests shall be perform ed at am bient tem perature.
3.5.
Exam ination of product.
Contact resistance, dry circuit.
Insulation resistance.
Dielectric withstanding voltage.
Electrical stability.
Capacitance.
Rev V
Materials
!
!
!
Ratings
!
!
Perform ance and Test Description
Test Requirem ents and Procedures Sum m ary
Test Description
Case and base: Polyester, glass filled
Rocker: Polyester
Spring contacts and leads: Copper alloy, gold over nickel plating
Current:
•
•
Tem perature operating: -55 to 105°C
Non-switching: 1.5 am peres m axim um at 50 volts dc (resistive load)
Switching: 100 m illiam peres m axim um at 5.0 volts dc (resistive load); 25 m illiam peres
m axim um 24.0 volts dc (resistive load)
Meets requirem ents of product
drawing and Application
Specification 114-1056.
50 m illiohm s m axim um initial.
100 m illiohm s final.
1 X 10 m egohm s m inim um .
500 vdc dielectric withstanding
voltage. 1 m inute hold. 1
m illiam pere m axim um leakage
current. No flashover or corona.
Tem perature rise shall not exceed
30 C from am bient.
5 picofarads m axim um .
3
Figure 1 (continued)
ELECTRICAL
Requirem ent
TE Spec 109-28-3.
Visual, dim ensional and functional
per applicable quality inspection
plan.
TE Spec 109-6-3.
Subject switches to 50 m v
m axim um open circuit at 50 m a
m axim um . A m inim um of 10
readings shall be m easured.
See Figure 3.
Test between a m inim um of 10 sets
of open switches and a m inim um of
10 sets of adjacent closed switch
contacts.
TE Spec 109-29-1.
Test between a m inim um of 10 sets
of open switches and a m inim um of
10 sets of adjacent closed switch
contacts.
TE Spec 109-45-1.
Subject switch to 50 vdc at 1.5
am peres m axim um current until
tem perature stabilizes. Measure
tem perature where shown in Figure
3.
TE Spec 109-47, Condition D.
Test between a m inim um of 10
adjacent closed switch circuits.
Apply a frequency of 100 kHz.
Procedure
108-7519
2 of 7