7-435470-1 Tyco Electronics, 7-435470-1 Datasheet - Page 6

• Manufacturer Part Number: 7-435470-1
• Description: DIP SW ASSY-BLK EXT ACT-2POS
• Manufacturer: Tyco Electronics

Specifications of 7-435470-1

• Rohs Information: 7-435470-1
• Circuit: SPDT
• Number Of Positions: 2
• Contact Rating @ Voltage: 0.1A @ 5VDC
• Actuator Type: Standard
• Actuator Level: Raised
• Mounting Type: Through Hole
• Orientation: Top Actuated
• Washable: No
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

4.
4.1.
4.2.
4.3.
4.4.
4.5.
Rev V
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
Connector housings and contacts shall be prepared in accordance with applicable Instruction Sheets.
They shall be selected at random from current production. Test groups 1 thru 6 shall consist of 18
switches. Three switches per each test sequence. Each test sequence shall have 1 of each profile style
and be used for qualification testing. Test groups 1 and 2 shall also be used for retention of
qualification.
B.
Qualification inspection shall be verified by testing sam ples as specified in Figure 2.
Retention of Qualification
If, in a five-year period, no changes to the product or process occur, the product shall be subjected to
groups 1 and 2 of the testing described in the test sequence, see Figure 2. Justification for exceeding
this tim e lim it m ust be docum ented and approved by the division m anager.
Requalification Testing
If changes significantly affecting form , fit or function are m ade to product or m anufacturing process,
product assurance shall coordinate requalification testing, consisting of all or part of original testing
sequence as determ ined by developm ent/product, quality and reliability engineering.
Acceptance
Acceptance is based on verification that product m eets requirem ents of Figure 1. Failures attributed to
equipm ent, test setup or operator deficiencies shall not disqualify product. W hen product failure occurs,
corrective action shall be taken and sam ples resubm itted for qualification. Testing to confirm corrective
action is required before resubm ittal.
Quality Conform ance Inspection
The applicable quality inspection plan will specify sam pling acceptable quality level to be used.
Dim ensional and functional requirem ents shall be in accordance with applicable product drawing and
this specification.
Sam ple Selection
Test Sequence
108-7519
6 of 7