CP1HXA40DRA Omron, CP1HXA40DRA Datasheet - Page 9

• Manufacturer Part Number: CP1HXA40DRA
• Description: 40 I/O,24DI,16DO REL,4AI,2AO
• Manufacturer: Omron

Specifications of CP1HXA40DRA

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Handy built-in functions
make maintenance easier
124
Memory Cassette
• Data, such as programs and initial
• The Memory Cassette can also be
PLC program design
memory values, can be stored on
a Memory Cassette (optional) and
copied to other systems.
used when installing new versions of
application programs.
Memory Cassette
CP1W-ME05M
Memory Cassette
Production site
7-segment Status Display
• The 7-segment Display provides two
• In addition to displaying error codes
• The 7-segment display is useful
display digits.
for errors detected by the PLC, codes
can be displayed on the display from
the ladder program.
for maintenance as well, allowing
problems that arise during system
operation to be grasped without
using any Support Software.
Example display: A memory error occurs in the UM
(error code 80F1, error details 0001).
That’s a
memory
error
1
1
1
1
Analogue Inputs Are Made Simple
An analogue control setting and an analogue input are
provided.
Analogue Input
This input has a resolution of 256 steps and is used for an
analogue input set of 0 to 10 V. Each CP1H CPU Unit has one of
these connectors built in. (The built-in analogue I/O for CP1HXA
CPU Units is separate.) A device, such as a potentiometer,
can be connected to enable direct manual operation and
control from a control panel. The maximum cable length is 3
meters. A connecting cable (1 m) is included with the CPU Unit.
Production site
System development
4
4
4
4
Battery-free Operation
• The values in the DM Area (32
• Battery-free operation is also
Kwords) are saved in the CPU Unit’s
built-in flash memory as initial
values, and can be read at startup.
possible when saving production
data and machine parameters in the
DM Area, turning OFF the power, and
using the same data again for the
next production run.
Note:
•
• Area bits and counter values.A battery is provided as a
• The user program (ladder program) is stored in built-in
the status of HR
standard feature with the CPU Unit.
flash memory,
so no battery is required to back it up.
A battery is required for the clock function and to retain
Analogue setting
The analogue control setting has a
resolution of 256 steps.
When the value is changed it is
displayed (hexadecimal) for three
seconds on the 7-segment display.
Programmable Controllers