585SX4Q25F103SP Honeywell, 585SX4Q25F103SP Datasheet - Page 142

• Manufacturer Part Number: 585SX4Q25F103SP
• Description: Potentiometers 10K Ohm 20% 1/20W 6mm
• Manufacturer: Honeywell
• Type: Potentiometerr
• Series: 585r

Specifications of 585SX4Q25F103SP

• Resistance: 10kohm
• Power Rating: 1/20W
• Tolerance (+ Or -): 20%
• Number Of Turns: 1Turn
• Technology: Carbon Film
• Mounting Style: Panel
• Termination Style: Pin
• Operating Temp Range: -55C to 120C
• Failure Rate: Not Required
• Shaft Diameter (mm): 6mm
• Product Diameter (mm): Not Requiredmm
• Product Length (mm): 19.5mm
• Product Height (mm): 11.35mm
• Product Depth (mm): 9.5mm
• Tolerance: 20 %
• Taper: Linear
• Element Type: Carbon
• Shaft Type: Flatted / D
• Shaft Length: 19.05 mm
• Shaft Diameter: 6 mm
• Product: Commercial Potentiometer
• Voltage Rating: 50 Volts
• Angle, Mechanical: 300 °
• Application: For manual controls, telecommunications and audio equipment
• Diameter, Shaft: 0.236 "
• Dimensions: 9.5mmL×9.5mmW×5mmH
• Linearity: ±5 %
• Material, Element: Carbon
• Mounting Type: PCB
• Power, Rating: 0.05 W
• Rotational Life: 10000 Cycles
• Shaft Style: Flatted Shaft
• Termination: PC Pins
• Voltage, Operating: 50 VAC
• Lead Free Status / RoHS Status: Compliant

PRESSURE SENSORS
TLD Series
140
OPTIONS
Flow-through/Output Signal 4 mA to 20 mA
MEASUREMENT TYPE
Compound
Compound
Compound
Flow-through/Output Signal 0 Vdc to 5.0 Vdc
MEASUREMENT TYPE
Compound
Single Port/Output Signal 4 mA to 20 mA
MEASUREMENT TYPE
Compound
With space at a premium in semiconductor gas distribution systems, the Series TLD pressure transducer with local
display offers an integrated solution that reduces the overall height of the transducer/display assembly to as little as 3.5
in [88,9 mm]. To accomplish this, the transducer’s signal amplifier is mounted within the display, with the added benefit
of zero and span adjustments conveniently located on the LED display face.
Supply voltage:
Signal conditioning:
Operating temperature range:
Compensated temperature range:
Termination type:
BF - Transducer at bottom, front display orientation
BS - Transducer at bottom, side display orientation
z
38,1
1.50
35,9
1.42
s
www.honeywell.com/sensing
82,5
3.25
26,1
1.03
82,5
3.25
Flow-through display orientation and transducer location
72,4
2.85
72,4
2.85
PRESSURE RANGE
-14.7 psig to 100 psig
-14.7 psig to 100 psig
-14.7 psig to 100 psig
PRESSURE RANGE
-14.7 psig to 100 psig
PRESSURE RANGE
-14.7 psig to 100 psig
38,1
1.50
38,1
1.50
26,1
1.03
z
35,9
1.42
38,1
1.50
s
CABLE
2 COND
1,8 m (6 ft)
1/4 in. OD 0.035 in. wall, 1/4 in long tube stub
1/4 in. female face seal, swivel
1/4 in. female face seal, swivel
1/4 in. OD 0.035 in. wall, 1/4 in long tube stub
1/4 in. female face seal, swivel
CONNECTIONS
CONNECTIONS
CABLE
2 COND
1,8 m (6 ft)
CV - Transducer at center back,
vertical display orientation
CH - Transducer at center back,
horizontal display orientation
77,0
3.03
42,7
1.68
-40 °C to 85 °C (-40 °F to 185 °F)
1,83 m (6 ft) 2-conductor cable
0 °C to 70 °C (32 °F to 158 °F)
z
38,1
1.50
38,1
1.50
REFERENCE
TLDF4CVT4V100CP
TLDF4CVVFV100CP
TLDF4BSVFV100CP
REFERENCE
TLDF5CVT4V100CP
REFERENCE
TLDS4BNVFV100CP
s
Amplified compensated
12.0 Vdc to 30.0 Vdc
CABLE
2 COND
1,8 m (6 ft)
38,1
1.50
38,1
1.50