585SX4Q25F103SP Honeywell, 585SX4Q25F103SP Datasheet - Page 64

• Manufacturer Part Number: 585SX4Q25F103SP
• Description: Potentiometers 10K Ohm 20% 1/20W 6mm
• Manufacturer: Honeywell
• Type: Potentiometerr
• Series: 585r

Specifications of 585SX4Q25F103SP

• Resistance: 10kohm
• Power Rating: 1/20W
• Tolerance (+ Or -): 20%
• Number Of Turns: 1Turn
• Technology: Carbon Film
• Mounting Style: Panel
• Termination Style: Pin
• Operating Temp Range: -55C to 120C
• Failure Rate: Not Required
• Shaft Diameter (mm): 6mm
• Product Diameter (mm): Not Requiredmm
• Product Length (mm): 19.5mm
• Product Height (mm): 11.35mm
• Product Depth (mm): 9.5mm
• Tolerance: 20 %
• Taper: Linear
• Element Type: Carbon
• Shaft Type: Flatted / D
• Shaft Length: 19.05 mm
• Shaft Diameter: 6 mm
• Product: Commercial Potentiometer
• Voltage Rating: 50 Volts
• Angle, Mechanical: 300 °
• Application: For manual controls, telecommunications and audio equipment
• Diameter, Shaft: 0.236 "
• Dimensions: 9.5mmL×9.5mmW×5mmH
• Linearity: ±5 %
• Material, Element: Carbon
• Mounting Type: PCB
• Power, Rating: 0.05 W
• Rotational Life: 10000 Cycles
• Shaft Style: Flatted Shaft
• Termination: PC Pins
• Voltage, Operating: 50 VAC
• Lead Free Status / RoHS Status: Compliant

EXPLOSION PROOF SWITCHES
CX Series
Weather Sealed
Explosion Proof
Switches
Actuators
62
CX switches, as are the LSX/BX Series, are built especially for outdoor use in hazardous atmospheres.
These enclosures are constructed to withstand the pressure of an internal explosion.
O-ring seals make the enclosure weatherproof but are outside of required flame paths so explosion proof
requirements are maintained.
As factory assembled, all basic switches operate on clockwise and counterclockwise rotation. The
actuating mechanism can be field adjusted for CW or CCW operation only.
Analog output, 4 mA to 20 mA, is available.
Basic switches operate nearly simultaneously in multiple switch devices.
Shafts of devices without shaft restoring force can be rotated through 360°.
Sealing:
NEMA
UL listed
CSA certified
Operating temperature:
Approvals:
Housing:
Conduit:
Contacts:
Electrical Ratings:
A
C
D
F
G
Switching options:
Analog position sensing specifications (Electrical rating “G”)
Current output:
Voltage compliance range:
Maximum load resistance:
Current signal output:
Span:
Null:
www.honeywell.com/sensing
Snap action contacts (1NC/1NO)
Single Pole, Double Throw
Analog Current Output (4 mA to 20 mA)
SPDT
UL/CSA Rating: L96
UL/CSA Rating: L59
UL/CSA Rating: L22
UL/CSA Rating: L22
CX-E only
Class I, Div. 1, Groups B (16CX, 24CX, 26CX, and 84CX only),
Class I, Div. 1, Groups B (16CX, 24CX, 26CX, and 84CX only),
A, C, D
80CX
F
4 mA position may be set at any angular position
C and D; and Class II, Div. 1, Groups E, F and G
Snap action contacts (2NC/2NO)
Adjustable from 15° to 90° of angular rotation
Double Pole, Double Throw
C and D; and Class II, Groups E, F and G
15 A, 120, 240 or 480 Vac, ind. and res
0.5 A, 125 Vdc, 0.25 A, 250 Vdc, res
0.3 A, 125 Vdc, 0.15 A, 250 Vdc, res
ATEX EExd IIC T6 Category II 2 GD
–25 °C to 85 °C (–13 °F to 185 °F)
10 A, 120 or 240 Vax, ind. and res
DPDT
1
/
8
1, 3, 4, 4X, 6, 6P, 7, 9 and 13
Hp, 120 Vac; ¼ Hp, 240 Vac
RL, Max., –V Supply - 12.5
1 A, 120 Vax, ind. and res
12.5 Vdc to 40 Vdc
12.5 Vdc to 40 Vdc
4 mA to 20 mA
4 mA to 20 mA
¾ in - 14NPT
1 A, 125 Vac
20 mA
Aluminium
UL, CSA
Bronze
Silver
Gold