R0K5562T0S000BE Renesas Electronics America, R0K5562T0S000BE Datasheet - Page 21

• Manufacturer Part Number: R0K5562T0S000BE
• Description: KIT STARTER FOR RX62T
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: MCUr

Specifications of R0K5562T0S000BE

• Design Resources: RX62T CPU Board Schematics
• Contents: Board, Cable, CD, Documentation, Emulator, Power Supply
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: RX600 series

RSKRX62T
Table 6-5 below details the different configurations and functions of the RS232 serial jumpers.
* By default, this jumper is not fitted to the RSK. R103 is fitted by default and TXD0 is connected to RS232
transceiver.
*By default, this jumper is not fitted to the RSK. R100 is fitted by default and RXD0 is connected to RS232
transceiver.
6.5
Table 6-6 below details the function of the option links associated with LIN configuration.
Table 6-7 below details the different configurations and functions of the LIN jumpers.
* By default, this jumper is not fitted to the RSK. R183 is fitted by default and Board_5V is connected to BAT
transceiver.
REJ10J2194-0100
Oct 10, 2010
J10*
J11*
R129
R132
R145
R146
J12*
Reference
Reference
Reference
LIN Configuration
Pins 1 and 2 shorted.
Connects TXD0 (MCU,
pin B2) to the RS232
transceiver (U5, pin 13).
Pins 1 and 2 shorted.
Connects RXD0 (MCU,
pin B6) to the RS232
transceiver (U5, pin 15).
Rev. 1.00
Connects IO3_LTX_CTX-B (MCU, pin
65) to header U6, pin 4.
Connects IO2_LRX_CRX-B (MCU, pin
66) to CAN transceiver (U6, pin 1).
Configures the module in master
mode.
[R146 must also be fitted]
Configures the module in master
mode.
[R145 must also be fitted]
Connects Board_5V to BAT.
Position One
Link Fitted Configuration
Link Fitted Configuration
Table 6-5: RS232 Serial Port Jumpers
Table 6-7: LIN Port Jumpers
Table 6-6: LIN Option Links
Pins 2 and 3 shorted.
Connects TXD1 (MCU, pin
B2)
transceiver (U5, pin 13).
Pins 2 and 3 shorted.
Connects RXD1 (MCU, pin
B6)
transceiver (U5, pin 15).
Position Two
to
to
the
the
Disconnects IO3_LTX_CTX-B (MCU,
pin 65) from header U6, pin 4.
Disconnects IO2_LRX_CRX-B (MCU,
pin 66) from CAN transceiver (U6, pin
1).
Configures the module in slave mode.
[R146 must also be removed]
Configures the module in slave mode.
[R145 must also be removed]
Disconnects Board_5V from BAT.
Link Removed Configuration
Link Removed Configuration
RS232
RS232
All pins open.
Disconnects
and TXD1 from the
RS232
(U5, pin 13). R103
defaults the setting to
position one.
All pins open.
Disconnects
and RXD1 from the
RS232
(U5, pin 15). R100
defaults the setting to
position one.
Position Three
transceiver
transceiver
RXD0
TXD0
6. Configuration
R128, R130
R131, R133,
R146
R145
R183
Related Ref.
Related Ref.
R103
R100
Related Ref.
Page 21 of 40