R0K5562T0S000BE Renesas Electronics America, R0K5562T0S000BE Datasheet - Page 8

• Manufacturer Part Number: R0K5562T0S000BE
• Description: KIT STARTER FOR RX62T
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: MCUr

Specifications of R0K5562T0S000BE

• Design Resources: RX62T CPU Board Schematics
• Contents: Board, Cable, CD, Documentation, Emulator, Power Supply
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: RX600 series

RSKRX62T
2. Power Supply
2.1
This RSK is supplied with an E1 debugger. The debugger is able to power the RSK board with up to 200mA. When
the RSK is connected to another system then that system should supply power to the RSK. All RSK and RSK+
boards have an optional centre positive supply connector using a 2.0mm barrel power jack.
This RSK supports one voltage input. Details of the external power supply connection are shown in Table 2-1
below.
2.2
When the RSK is purchased, the RSK board has the ‘Release’ or stand-alone code from the example tutorial code
pre-programmed into the Renesas microcontroller. On powering up the board the user LEDs will start to flash.
After 200 flashes or after pressing any switch, the LEDs will flash at a rate controlled by the potentiometer.
REJ10J2194-0100
Oct 10, 2010
PWR
This RSK should only be supplied with a regulated power supply.
Connector
Requirements
Power-Up Behaviour
Rev. 1.00
Regulated, 5V DC
Table 2-1: Main Power Supply Requirements
Supply Voltages
Do Not Fit
J13 Setting
2. Power Supply
Do Not Fit
J14 Setting
Page 8 of 40