72-8150 TENMA, 72-8150 Datasheet - Page 14

• Manufacturer Part Number: 72-8150
• Description: Capacitance Meter With Resistance
• Manufacturer: TENMA

Specifications of 72-8150

• Accuracy %: 2%
• External Height: 6.77"
• External Width: 3.27"
• External Depth: 1.5"
• No. Of Batteries: 1
• Kit Contents: Capacitance Meter, Test Clips, Owners Manual, 1 9V Battery
• Lead Free Status / RoHS Status: na

Note
l
l
l
4.
5.
Do not short the test clips to avoid the consumption of
battery.
To minimize the effect of capacitance stored in the test
clips, the test clips should be as short as possible and
use the Small Value Capacitance Jack when measuring
small value of capacitance.
When capacitance measurement has been completed,
disconnect the connection between the test clips and
the circuit under test and remove the test clips from the
input terminals of the Meter.
When measuring small value capacitor, that is 200pF,
2nF and 20nF, first open circuit the test clips or the
Small Value Capacitance Jack, then turn the
Capacitance Zero Adjustment Switch to adjust zero.
The measured value shows on the display.
14
Model 72-8150: OPERATING MANUAL