72-1015 TENMA, 72-1015 Datasheet - Page 22

• Manufacturer Part Number: 72-1015
• Description: MULTIMETER, DIGITAL, BENCH, 3-3/4 DIGIT
• Manufacturer: TENMA

Specifications of 72-1015

• Dmm Type: Bench
• Voltage Measuring Range Dc: 600mV To 1000V
• Voltage Measuring Range Ac: 600mV To 1000V
• Current Measuring Range Dc: 60µA To 10A
• Current Measuring Range Ac: 60µA To 10A
• Lead Free Status / RoHS Status: na

C. Measuring Resistance (see figure 5)
To avoid damage to the Meter or to the devices under
test, disconnect circuit power and discharge all the
high-voltage capacitors before measuring resistance.
To avoid possible injury, please do not attempt to input
voltages higher than 60V DC or 30V AC.
To measure resistance, connect the Meter as follows:
1 .
2 .
3 .
20
Insert the red test lead into the
black test lead into the COM terminal.
Set the rotary switch to
button to select
Connect the test leads across with the object being
measured. The measured value shows on the display.
Warning
measurement mode.
, press SELECT
terminal and the
Model 72-1015: OPERATING MANUAL
(Figure 5)